Condensation Cure Electronic Potting Compound Silicone Rubber
Description of Condensation Cure Electronic Potting Compound Silicone Rubber
HY-210 and HY-215 are condensation silicone potting compound in two parts with the characteristics of low viscosity, easy pouring operation, and good bonding features. It can be cured completely at room temperature. The safety of potting compound silicone can reach the EU-ROHS requirements fully.
Application of Condensation Cure Electronic Potting Compound Silicone Rubber
- Applying for the surface of PC(Poly-carbonate), PP, ABS, PVC, metal, etc
- Potting for Protection of general electronic module
- Insulation, waterproof and bonding of electronic parts
- Filling for LED, LCD electronic display, circuit board
- Outdoor protection for LED screen
Datasheet of Condensation Cure Electronic Potting Compound Silicone Rubber
|Properties Index||Part A||Part B||Part A||Part B|
|Before Curing||Appearance||Transparent Liquid||Yellowish Fluid||Black Fluid||Yellowish Fluid|
Features When Operation
|Mix Ratio(By weight)||10:1||10:1|
|Curing Time(hrs, basically cured)||3||3|
|Curing Time(hrs, perfectly cured)||24||24|
Note: Above technical datasheet doesn’t include all of our products, and it’s not the fixed data,
they can be adjustable according to customer’s requirement.
Notice of Condensation Cure Electronic Potting Compound Silicone Rubber
- All data of this product above base on 25℃ with 55% humidity conditions. We don’t guarantee a same date if testing under different conditions, or when data was regenerated.
- Bubble release if necessary & Deaeration the mixture under 0.08 MPa for 3 minutes.
Package of Condensation Cure Electronic Potting Compound Silicone Rubber
Standard Packing for Electronic Potting Compound Silicone is 22kg/set(Part A 20kg+ Part B 2kg)
If you are interest in our condensation cure electronic potting compound silicone rubber, we
welcome you to negotiate with us. Thank you.