choose your language Espanol Francais Arabic Portuguese русский中文English silicone rubber for cake molding in Christmas | Silicone Rubber
21 December 2015
Category:
Silicone News
Comments: Comments Off on silicone rubber for cake molding in Christmas

silicone rubber for cake molding in Christmas

2015 Christmas and 2016 New Year is approaching!
As we all know, many people would like to DIY a lot of interesting crafts(like Christmas trees, gifts, chocolates, cakes, etc) with their family in this special period in order to celebrate the happy holiday.
And the important thing of making food mold is the safety and edibility, right?Don’t worry about it! Our HY Company can supply the FDA silicone–HY-E625 for your choice. It is suitable liquid silicone rubber for cake mold. Below is the detailed information of our HY-E625.

Operation instructions
Step 1: prepare the original molds
Prepare an original mold and clean it totally before operation .
*Notes:Make sure your original molds and operation tool cleaned up totally to avoide uncure problem .

Step 2: Take 100 G part A and 100 G part B (Or 100 G part A and 10 G part B) and mix them evenly.
*Notes: Addition cure mold making silicon rubber is two part flowing liquid , Pls follow the step strictly:
1.Weigh the two part exactly by electronic weight..
If any part not in exactly weight , it may cause changing of hardness , or even cause uncure problem.
2.Mix part A and part B evenly.
Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What’s more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber.
Step 3: Vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.

Step 4: Pouring casting or Brush operation
*Notes:1. For simple pattern products we suggest use pouring operation way , which will be very easy to operate and demould. Pourable silicone require light viscosity which will be easy to flow smoothly and easy to de-air .
2.For delicate pattern products we suggest use brushing operation way , which can copy the pattern exactly. Brushable silicone require high viscosity which won’t be easy to flow away and easy to brush .
3. We suggest to set the silicone mold for another 12 hours after demould before put into large production .

When you make the molds according to the above operations, a beautiful mold will be finished.

Comments are closed.