Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
English

Sanitary ware applications have special working conditions. Products operate in constant humidity, contact with soap, shampoo, cleaning agents and hard water, and components must resist mold growth, staining and degradation for years. Conventional rubber and polyurethane foams absorb water, harbor mold and bacteria, harden and crack under cleaning chemicals, and compress permanently, while their limited cleanability raises hygiene concerns in bathrooms. In addition, shower panels and bathtubs span large dimensions with complex curved joints. Poor shrinkage control of foam materials will cause dimensional deviation, water leakage and installation difficulties, and frequent replacement significantly increases cost for manufacturers and homeowners.
Liquid Silicone Foam from Hong Ye Silicone is a platinum-cured two-component Addition Curing Silicone rubber with a formula optimized for sanitary ware applications. With a high expansion ratio of 2 times nominal and up to 7 times maximum, the material reduces weight and raw material consumption while maintaining reliable waterproof sealing and cushioning. After mixing and foaming, it forms a uniform closed-cell structure with low linear shrinkage, ensuring stable dimensions after curing. Mass-produced sealing strips, gaskets and anti-slip pads maintain consistent size, reducing later assembly adjustment and ensuring fit precision on installation.
In terms of mechanical performance, this Foamed Silicone delivers high rebound resilience and low compression set. Shower doors and bathtub joints undergo repeated opening, closing and thermal movement, and seals need to recover their shape after every cycle. The high-rebound formula effectively prevents permanent deformation and sealing failure. The cured foam also offers outstanding moisture resistance, chemical inertness and a wide service temperature range from -65°C to 200°C. Being non-toxic, odorless and hypoallergenic, it remains safe for skin contact in wet environments. After long exposure to water, soap and cleaning agents, it resists mold, aging and performance decay. One seal can serve for years, greatly reducing maintenance cost for homeowners.

For manufacturing adaptability, this liquid silicone foam supports two mainstream processes: mold casting and continuous dispensing. For complex gasket profiles and anti-slip mats, mold casting is widely adopted. Mixed material is poured or injected into the cavity, foams and cures at ambient or elevated temperature, and demolds as a finished sealing or cushioning component. Long linear seals and simple strips can adopt continuous dispensing, where the two components are metered, mixed and applied directly onto the hardware structure. The simple 1:1 mixing ratio and stable foaming behavior eliminate complex equipment adjustments. It can be applied by small sanitary ware workshops as well as large automated hardware production bases.
Industry trends show the global sanitary ware sector is moving toward smart bathrooms and higher hygiene standards. Custom sealing orders from premium sanitary ware, hotel projects and renovation markets keep rising. Products become more compact and joint structures more complex. Downstream manufacturers focus not only on raw material price, but also on comprehensive indicators including waterproofing, mold resistance, service life and certification compliance. Hong Ye Silicone keeps optimizing formulas, launching liquid silicone foam grades with different densities, hardness and pot life for applications ranging from thin sealing strips to thick anti-slip mats. Test documents are continuously upgraded to satisfy hygiene and environmental compliance requirements of domestic and overseas projects.
Industry insiders state that the final waterproof performance of sanitary ware fundamentally depends on sealing material quality. High-performance liquid silicone foam from Hong Ye Silicone helps convert complex sealing and comfort designs from product drawings into mass-producible sanitary components, lowering manufacturing barriers for sophisticated bathroom products. In the future, with the continuous advancement of smart bathrooms, home renovation and hotel construction, the market for foamed silicone sealing materials will expand further. Foam material technology will keep upgrading to support the sanitary ware industry in delivering cleaner, drier and more comfortable bathrooms.
November 18, 2026
November 18, 2026
August 31, 2026
August 25, 2026
November 16, 2026
November 13, 2026
Email to this supplier
November 18, 2026
November 18, 2026
August 31, 2026
August 25, 2026
November 16, 2026
November 13, 2026
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.