Fast-Curing High-Fluidity Liquid Silicone Foam
Get Latest Price| Payment Type: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,FAS,FCA,CPT,CIP,DEQ,DDP,DDU,Express Delivery,DAF |
| Min. Order: | 1 Kilogram |
| Transportation: | Ocean,Land,Air,Express |
| Port: | shenzhen |
English
| Payment Type: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,FAS,FCA,CPT,CIP,DEQ,DDP,DDU,Express Delivery,DAF |
| Min. Order: | 1 Kilogram |
| Transportation: | Ocean,Land,Air,Express |
| Port: | shenzhen |
Model No.: HY-F series
Brand: HONG YE SILICONE
Origin: HUIZHOU
Certification: 9001
| Selling Units | : | Kilogram |
| Package Type | : | 1kg/5kg/25kg/200kg |
| Picture Example | : |
|
The file is encrypted. Please fill in the following information to continue accessing it

Product Overview
Our fast-curing series is designed for procurement and production partners running automated mixing, dispensing and molding lines, where every extra minute of cycle time costs money. Low viscosity lets the foam fill thin walls, deep cavities and fine details before it starts to gel, while the short working time and rapid cure allow demolding within a tight cycle, freeing molds and lifting daily output. Because the two components are supplied at a clean 1:1 ratio, standard metering and mixing equipment handles the material without special calibration, and batch-to-batch stability keeps shot weights and cell structures consistent. Compared with slow-curing foam that occupies molds for long periods, this Foaming Silicone Rubber raises throughput, reduces mold inventory and lowers labor cost per part.
Key Features & Advantages
Short Working Time & Fast Demold: Working time from 3–5 minutes and rapid curing shorten the production cycle, allowing quick demolding, higher daily output and better mold utilization on automated lines.
High Fluidity for Complex Molds: Low viscosity from 2,000 to 30,000 cps lets the foam flow into thin walls, deep cavities and fine textures, filling details completely before gelation.
1:1 Metering Compatibility & Batch Stability: The clean 1:1 ratio suits standard dispensing and mixing equipment, while stable batches keep shot weight and cell structure consistent shot after shot.
UL94 V-0 Flame Safety & Wide Temperature Range: All grades meet UL94 V-0 and work from -65℃ to 200℃, so fast production does not compromise fire safety or durability.
How to Use (Step-by-Step Guide)
Ratio Confirmation: Confirm the mixing ratio of Component A and Component B — 1:1 for our addition-curing fast-curing liquid silicone foam.
Metering & Mixing: On automated lines, feed A and B through a 1:1 metering unit with static or dynamic mixing; for manual work, weigh precisely and stir 2–3 minutes without introducing air.
Dispensing or Pouring: Dispense into the mold quickly within the working time; match shot size and mold temperature to the grade so the foam fills the cavity before gelling.
Curing & Demolding: Cure at room temperature or with mild heat; demold as soon as the part is dimensionally stable, then trim and inspect.

Application Scenarios
High-volume foam parts on automated lines, mass-produced sealing gaskets and strips, cushioning pads for automotive, electronics and packaging, insoles and seat pads in volume production, and consumer foam components requiring short cycles. This fast-curing Foaming Silicone Rubber helps partners raise output, shorten lead times and control cost per part.
Technical Specifications Type: Two-Component Addition-Curing Liquid Silicone Foam (fast-curing series); Available Grades: HY-F662 to HY-F6610, 2×–10× foaming ratio; Viscosity: 2,000–30,000 cps (grade-dependent); Working Time: 3–5 minutes by machine (customizable); Mix Ratio: 1:1 (A:B); Curing Type: Room-Temperature/Heat Curing; Hardness: Shore C 2–35 (customizable); Density: 0.105–0.525 g/cm³; Linear Shrinkage: Low; Operating Temperature: -65℃ to 200℃; Color: Liquid translucent, cured white; Flame Rating: UL94 V-0; Compliance: EU RoHS; Shelf Life: 12 months (sealed storage); Non-hazardous; Customizable parameters available.
Certifications & Compliance
Our fast-curing Silicone Foam complies with international standards: ISO 9001 (strict quality control), CE Certification, EU RoHS Directive and UL94 V-0 flame rating, meeting global production, sealing and cushioning requirements, trusted by global manufacturers and procurement partners.
Customization Options
We provide process-level customization: adjust working time, curing speed, viscosity and foaming ratio (2×–10×) to match your line speed and equipment; tune hardness (Shore C 2–35), density, color and packaging; provide formulation support for automated metering and mold design, meeting both trial runs and mass production requirements.
Production Process & Quality Control
We implement a strict 5-step quality control process: raw material screening, precision automated mixing, performance testing (viscosity, working time, density, hardness, flame rating), curing and dimension verification, and sealed packaging. Production runs on 20 production lines with stable global supply; non-hazardous, transportable as general chemicals.


FAQ
Q: How short can the working time be?
A: Standard grades run 3–5 minutes by machine, and formulation can be adjusted to match faster or slower line speeds.
Q: Is it compatible with automated metering equipment?
A: Yes, the 1:1 ratio suits standard dispensing and mixing units; we can advise on equipment settings and mold temperature.
Q: Won't fast curing cause incomplete filling?
A: Low viscosity and matched working time allow the foam to fill thin walls and fine details before gelation; mold design and shot size are tuned together with the grade.
Q: Can curing speed be customized?
A: Yes, working time, curing speed and viscosity can be adjusted to your production line.
Q: How should the product be stored?
A: Seal and store in a dry, cool place; shelf life is 12 months, shipped as non-hazardous cargo.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.