Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
English

Medical rehabilitation and patient care products have special working conditions. Patients may remain in contact with cushions for hours or days, and products must resist sweat, body fluids and repeated disinfection without degrading. Conventional polyurethane and gel foams absorb moisture, harbor bacteria, develop odors and compress permanently, while their limited durability and chemical sensitivity raise concerns in clinical environments. In addition, care products span complex body-contoured shapes with precise pressure-relief requirements. Poor shrinkage control of foam materials will cause inconsistent thickness, uneven support and pressure concentration points, and frequent material replacement significantly increases cost for care facilities.
Liquid Silicone Foam from Hong Ye Silicone is a platinum-cured two-component Addition Curing Silicone rubber with a formula optimized for medical cushioning applications. With a high expansion ratio of 2 times nominal and up to 7 times maximum, the material reduces weight and raw material consumption while maintaining reliable pressure distribution and comfort. After mixing and foaming, it forms a uniform closed-cell structure with low linear shrinkage, ensuring stable dimensions after curing. Mass-produced positioning pads, seat cushions and support inserts maintain consistent thickness and density, reducing later adjustment work and ensuring fit precision in care products.
In terms of mechanical performance, this Foamed Silicone delivers high rebound resilience and low compression set. Patients shift weight repeatedly throughout the day, and cushions need to recover their shape after every cycle to maintain pressure relief. The high-rebound formula effectively prevents permanent deformation and support loss. The cured foam also offers excellent moisture resistance, chemical inertness and a wide service temperature range from -65°C to 200°C. Being non-toxic, odorless and hypoallergenic, it remains safe for prolonged skin contact. After long exposure to sweat, cleaning agents and disinfectants, it resists aging, cracking and performance decay. One cushion can serve for years, greatly reducing replacement cost for hospitals and care facilities.

For manufacturing adaptability, this liquid silicone foam supports two mainstream processes: mold casting and continuous dispensing. For body-contoured cushions and complex support shapes, mold casting is widely adopted. Mixed material is poured or injected into the cavity, foams and cures at ambient or elevated temperature, and demolds as a finished cushioning component. Simple flat pads and support layers can adopt continuous dispensing, where the two components are metered, mixed and applied directly onto the substrate. The simple 1:1 mixing ratio and stable foaming behavior eliminate complex equipment adjustments. It can be applied by small medical accessory workshops as well as large automated care product production bases.
Industry trends show the global medical care sector is moving toward home-based rehabilitation and higher hygiene standards. Custom cushioning orders from hospital, rehabilitation center and home care projects keep rising. Products become more specialized and body-contoured shapes more complex. Downstream manufacturers focus not only on raw material price, but also on comprehensive indicators including pressure relief, cleanability, skin safety and certification compliance. Hong Ye Silicone keeps optimizing formulas, launching liquid silicone foam grades with different densities, hardness and thickness for applications ranging from thin support layers to thick pressure-relief cushions. Test documents are continuously upgraded to satisfy medical and environmental compliance requirements of domestic and overseas projects.
Industry insiders state that the final comfort and safety of medical care products fundamentally depends on material quality. High-performance liquid silicone foam from Hong Ye Silicone helps convert complex pressure-relief and ergonomic designs from product drawings into mass-producible care components, lowering manufacturing barriers for sophisticated rehabilitation products. In the future, with the continuous advancement of aging-care services, rehabilitation medicine and home healthcare, the market for foamed silicone cushioning materials will expand further. Foam material technology will keep upgrading to support the medical care industry in delivering safer and more comfortable patient support.
November 16, 2026
November 16, 2026
August 31, 2026
August 25, 2026
November 16, 2026
November 13, 2026
Email to this supplier
November 16, 2026
November 16, 2026
August 31, 2026
August 25, 2026
November 16, 2026
November 13, 2026
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.