Product Overview
Mass production of toy crafts requires pad printing silicone with minimal shrinkage and strong durability to avoid pattern distortion and frequent replacement. Our Low Shrinkage Pad Printing Silicone solves pain points like batch inconsistency, short service life and blurred details. As a 25+ year silicone expert, we integrate it with Liquid Pad Printing Silicone and Silicone Potting Compound, providing one-stop solutions for toy craft printing and electronic component protection. Produced under ISO 9001 standards, it aligns with core products like Toy mold silicone and Addition Curing Silicone, ensuring stable quality for large-scale production. Technical Specifications
Type: Two-component RTV 2 Silicone Rubber; Base Material: Premium low-impurity silicone; Viscosity: 4000-7000 mPa·s (25℃); Hardness: 18-25 Shore A (customizable); Curing Time: 3-4 hours (room temp); Shrinkage Rate: ≤0.1% (core advantage); Printing Life: ≥4000 cycles (ideal for mass production); Operating Temp: -50℃ to 180℃; Shelf Life: 6 months (sealed, dry); Mix Ratio (A:B): 100:2-3; Compatible with: Liquid Pad Printing Silicone, Electronic potting compound, Silicone Potting Compound, Toy Mold Silicone. Product Features & Advantages
1. Ultra-Low Shrinkage: ≤0.1% shrinkage ensures consistent pattern size across batches, reducing scrap rates in mass production. 2. Superior Durability: Wear/solvent-resistant, supporting 4000+ printing cycles to cut replacement costs and boost production efficiency by 25%. 3. Precision Transfer: Impurity-free formula delivers sharp, clear patterns, fitting fine toy craft textures and logos. 4. Seamless Compatibility: Pairs with Liquid Pad Printing Silicone for efficient printing and Silicone Potting Compound for electronic toy post-processing. 5. Toy-Safe Compliance: Non-toxic, meets ASTM F963/EN 71, suitable for child-contact toy crafts. 6. Easy Operation: Low viscosity enables bubble-free pouring,适配 irregular toy shapes.
How to Use
1. Clean pad mold thoroughly, dry, apply release agent, place on level surface. 2. Mix silicone (A/B) evenly, add silicone oil to adjust hardness for toy craft surfaces. 3. Slowly pour into mold to avoid bubbles, ensuring full coverage of pattern areas. 4. Cover with dust-proof board, cure 3-4 hours at room temp, demold gently. 5. Pair with Liquid Pad Printing Silicone for mass printing; use Electronic potting compound for electronic toy components.
Application Scenarios
Widely used for mass printing of patterns, logos and textures on plastic toys, resin crafts, educational toys, toy accessories and custom craft gifts. Ideal for B2B buyers like toy factories, craft manufacturers and branded merchandise suppliers. It ensures batch consistency, reduces production costs, and pairs with Silicone Potting Compound to support integrated production of electronic toys, optimizing procurement and production efficiency.
Certifications and Compliance
Certified with ISO 9001, CE, UL; meets RoHS, REACH, ASTM F963 and EN 71 standards. Non-toxic, odorless, free of harmful substances, fully compliant with global toy safety regulations for child-contact products.
Customization Options
Tailored for mass production: 1. Hardness/viscosity adjustment for different toy craft materials. 2. Formula matching with Liquid Pad Printing Silicone/Silicone Potting Compound. 3. Custom batch packaging for large-scale production. 4. OEM/ODM for performance parameters (printing life, shrinkage) to fit specific production lines.
Production Process
Raw material inspection → Precision formula mixing (for low shrinkage) → High-temp homogenization → Quality testing (shrinkage, viscosity, durability) → Vacuum degassing → A/B component packaging → Final inspection. Pre-production samples available to confirm mass production compatibility.
FAQ
Q1: Is it suitable for 24-hour continuous mass production?
A1: Yes, its high durability supports long-term continuous printing without frequent replacement.
Q2: Can it print fine patterns on small toy parts?
A2: Yes, zero shrinkage and precision formula ensure clear transfer of small, intricate patterns.
Q3: Compatible with third-party potting compounds?
A3: Optimized for our Electronic potting compound, customizable to match others.
Q4: Storage tips?
A4: Sealed at 15-25℃, away from water, shelf life 6 months.
Q5: What’s the bulk order lead time?
A5: 7-15 days, with flexible adjustment for large orders.
Shenzhen Hong Ye Jie Technology Co., Ltd
Contact Now
