Hongye Silicone HY-916 Ultra Soft Pad Printing Silicone 14 Shore A 570 Percent Elongation Deep Concave Transfer

Developed for deep concave large curved irregular products. 14 Shore A softest, 570 percent elongation highest, soft but 25kN per m tear. Condensation cure room temp 3 to 4h. ISO 9001, 138 countries.

Core Selling Points • 14 Shore A ultra soft lowest • 570 percent elongation highest • 25kN per m tear soft but durable • Reaches deep concaves • Conforms to irregular surfaces • 36000 viscosity good flow • Room temp 3 to 4h cure • 30 to 40 min operation • 100:2 to 100:3 mix • Toys crafts electronics • Soft durable balance • Solves hard head limitations

Technical Parameters Model: HY-916 | Color: White | Hardness: 14±2 Shore A | Viscosity: 36000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 3.5 MPa | Tear Strength: 25±2 kN/m | Elongation: 570% | Mix Ratio: 100:2~100:3 | Density: 1.10±0.03 g/cm3 Model: HY-901 | Color: White | Hardness: 30±2 Shore A | Viscosity: 32000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 3.8 MPa | Tear Strength: 22±2 kN/m | Elongation: 380% | Mix Ratio: 100:2~100:3 | Density: 1.12±0.03 g/cm3 Model: HY-902 | Color: White | Hardness: 30±2 Shore A | Viscosity: 35000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 4.0 MPa | Tear Strength: 24±2 kN/m | Elongation: 430% | Mix Ratio: 100:2~100:3 | Density: 1.15±0.03 g/cm3 Model: HY-912 | Color: White | Hardness: 30±2 Shore A | Viscosity: 32000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 4.0 MPa | Tear Strength: 25±2 kN/m | Elongation: 340% | Mix Ratio: 100:2~100:3 | Density: 1.13±0.03 g/cm3

Application Scenarios Toy Factory: Irregular curved surfaces, large curves recesses, 14 Shore A soft conforms like rubber to every contour, 25kN/m tear durable. Crafts Factory: Deep grooves, relief carvings, pad compresses into grooves to reach bottom, complete pattern transfer.

Operation

1. Prepare mold
2. Weigh 100:2 to 100:3
3. Stir 3 to 5 min
4. Degas 5 to 8 min
5. Pour slowly
6. Cure 3 to 4h, demold gently

Selection Guide HY-901 Economic: 30A, flat best value. HY-902 Medium: 30A, clearer transfer. HY-912 High Tear: 30A, high volume long life. HY-916 Ultra Soft: 14A, deep concave irregular. HY-933 Addition: 34A, low shrinkage high precision.

Recommended Toys and crafts deep concave irregular curved surface printing.

Quality ISO 9001, COA, RoHS REACH.

Packaging 1kg to 200kg.

Advantages Own production, 100 tons monthly, stock available.

Ordering T/T Paypal, 1 to 3 days.

Support Consultation, custom formula.

Precautions Gloves, accurate weighing.

Storage Cool dry, 12 months.

FAQ Q: Too soft for all? A: For deep concave only, flat surfaces use 30A grades. Q: Tears easily? A: 25kN/m tear highest, correct handling durable. Q: Reach groove bottom? A: Adjust downstroke depth, test print first.