Anti-Stain Bionic Skin for Humanoid Service Robots

Product Features

1. Core anti-sebum & oil resistant performance: Special molecular modification prevents skin grease and sweat oil from adhering and penetrating the silicone layer. The surface is easy to wipe clean without leaving residual oil stains.
2. Long-lasting clean bionic appearance: No oil infiltration after daily human contact, avoiding yellowing and dirty marks caused by sebum contamination, keeping the skin sample fresh for years.
3. Flexible molding performance: Controllable viscosity, ideal for ultra-thin skin on robot faces, fingertips and joints, less bubble and wrinkle defects.
4. Platinum eco-friendly formula: Free of heavy metals and harmful additives, safe for long-term direct human skin contact.
5. Stable anti-fouling durability: The oil-resistant function comes from bulk material improvement instead of surface coating, so the anti-stain effect will not fade after repeated wiping and friction.
6. 

How to Use

1. Stir component A and component B separately until uniform;
2. Mix A and B strictly at 1:1 weight ratio and stir evenly for 2–3 minutes;
3. Carry out vacuum degassing to remove air bubbles inside the mixed compound;
4. Complete pouring or brush coating within the pot life, then wait for full curing;
5. Demold to obtain finished anti-sebum oil resistant bionic robot skin.

Application Scenarios

Bionic skin for commercial service humanoid robots, reception robot palm and finger skin, interactive exhibition robot outer skin, simulation mannequin skin, and all bionic parts that require long-time human contact and anti-oil contamination.

Value to Buyers

Ordinary bionic silicone will absorb human sebum and sweat oil after frequent hand contact, forming hard-to-clean dark stains and ruining the robot’s appearance. Our anti-sebum robot skin silicone fundamentally blocks oil penetration, greatly reducing maintenance work and keeping the robot skin clean all year round. Hong Ye Jie offers free samples and professional molding technical support to shorten your R&D cycle.

Certifications & Compliance

Our factory has passed ISO9001 quality management system certification. Materials meet RoHS and REACH international environmental standards. Every batch will go through raw material inspection, first article test and pre-shipment sampling inspection to guarantee stable batch quality.

Customization Options

Hardness, viscosity, skin color, pot life and curing speed can be customized as required. We support small-batch trial production, sample testing and large-scale mass production.

FAQ

Q1: Will the oil-resistant effect wear off after long-term wiping? A1: The anti-oil performance is integrated into the silicone molecular structure, not a surface coating. The anti-sebum property remains stable after long-term wiping and friction. Q2: Can this material be made into ultra-thin facial skin? A2: The viscosity is well optimized for thin-layer brush coating, which can form thin and tight bionic skin on complex curved surfaces. Q3: Is the material safe for continuous human touch? A3: We adopt platinum curing system without toxic additives, fully fit for long-term human-robot interactive contact. Q4: Can we customize special skin colors? A4: We support color matching for all types of human skin tones and customized solid colors.