Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
English

Marine applications have special working conditions. Equipment operates in constant contact with saltwater, sunlight, fuels, cleaning agents and humidity, and components must survive years of exposure without losing performance. Conventional polyurethane and EVA foams absorb water, lose buoyancy, degrade under UV radiation, crack in salt environments and support mold growth, while their limited durability raises safety concerns on water. In addition, boat seats and hull components span large dimensions with complex curved shapes. Poor shrinkage control of foam materials will cause dimensional deviation, sealing gaps and water ingress, and frequent replacement significantly increases cost and downtime for boat owners.
Liquid Silicone Foam from Hong Ye Silicone is a platinum-cured two-component Addition Curing Silicone rubber with a formula optimized for marine applications. With a high expansion ratio of 2 times nominal and up to 7 times maximum, the material reduces weight and raw material consumption while maintaining reliable sealing and buoyancy support. After mixing and foaming, it forms a uniform closed-cell structure with low linear shrinkage, ensuring stable dimensions after curing. Mass-produced seat cushions, buoyancy layers and sealing profiles maintain consistent size, reducing assembly adjustment and ensuring fit precision on installation.
In terms of mechanical performance, this Foamed Silicone delivers high rebound resilience and low compression set. Boat seats and deck components undergo repeated loading, wave impact and thermal cycling, and materials need to recover their shape after every cycle. The high-rebound formula effectively prevents permanent deformation and comfort loss. The cured foam also offers outstanding saltwater resistance, UV stability, moisture resistance, inherent flame retardancy and a wide service temperature range from -65°C to 200°C. Being non-toxic and odorless, it is safe for products used in close contact with passengers. After long exposure to salt, sunlight and humidity, it resists aging, cracking and performance decay. One component can serve for years, greatly reducing replacement cost for boat owners.
For manufacturing adaptability, this liquid silicone foam supports two mainstream processes: mold casting and continuous dispensing. For complex seat contours and thick buoyancy layers, mold casting is widely adopted. Mixed material is poured or injected into the cavity, foams and cures at ambient or elevated temperature, and demolds as a finished cushioning or buoyancy component. Long linear seals and simple strips can adopt continuous dispensing, where the two components are metered, mixed and applied directly onto the marine structure. The simple 1:1 mixing ratio and stable foaming behavior eliminate complex equipment adjustments. It can be applied by small marine workshops as well as large automated boat production bases.

Industry trends show the global marine sector is moving toward premium leisure experiences and higher safety standards. Custom cushioning and buoyancy orders from yacht, water sports and offshore projects keep rising. Interiors become more luxurious and structures more complex. Downstream manufacturers focus not only on raw material price, but also on comprehensive indicators including saltwater resistance, UV stability, flame rating and long-term durability. Hong Ye Silicone keeps optimizing formulas, launching liquid silicone foam grades with different densities, hardness and thickness for applications ranging from thin sealing strips to thick buoyancy cushions. Test documents are continuously upgraded to satisfy marine safety and environmental compliance requirements of domestic and overseas projects.
Industry insiders state that the final comfort and safety of marine equipment fundamentally depends on material quality. High-performance liquid silicone foam from Hong Ye Silicone helps convert complex sealing, buoyancy and comfort designs from naval drawings into mass-producible marine components, lowering manufacturing barriers for sophisticated boat and offshore equipment. In the future, with the continuous advancement of marine leisure, yacht manufacturing and offshore engineering, the market for foamed silicone marine materials will expand further. Foam material technology will keep upgrading to support the marine industry in delivering safer, drier and more comfortable journeys on water.
November 20, 2026
November 20, 2026
August 31, 2026
August 25, 2026
November 16, 2026
November 13, 2026
Email to this supplier
November 20, 2026
November 20, 2026
August 31, 2026
August 25, 2026
November 16, 2026
November 13, 2026
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.