High Tear Pad Printing Silicone 30 Shore A 25kN/m Tear Long Life for High Volume Production

HY-912 developed for high frequency high volume production requiring long pad durability. 30 Shore A standard hardness, 4.0MPa tensile, 25kN per m tear highest, 340 percent elongation. Condensation cure room temp 3 to 4h, 30 to 40 min operation. 32000 mPa.s viscosity, good leveling. ISO 9001 certified, exported to 138 countries.

Core Selling Points • High tear 25kN per m highest in series • 30 Shore A standard hardness • 4.0MPa tensile strong durable • 25kN per m tear long pad life • 340 percent elongation with stiffness • 32000 viscosity good leveling • Resists tearing repeated compression • 24 hour continuous production • 30 to 40 min operation • Room temp 3 to 4h cure • 100:2 to 100:3 mix • Lowers overall cost improves efficiency

Technical Parameters Model: HY-912 | Color: White | Hardness: 30±2 Shore A | Viscosity: 32000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 4.0 MPa | Tear Strength: 25±2 kN/m | Elongation: 340% | Mix Ratio: 100:2~100:3 | Density: 1.13±0.03 g/cm3 Model: HY-901 | Color: White | Hardness: 30±2 Shore A | Viscosity: 32000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 3.8 MPa | Tear Strength: 22±2 kN/m | Elongation: 380% | Mix Ratio: 100:2~100:3 | Density: 1.12±0.03 g/cm3 Model: HY-902 | Color: White | Hardness: 30±2 Shore A | Viscosity: 35000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 4.0 MPa | Tear Strength: 24±2 kN/m | Elongation: 430% | Mix Ratio: 100:2~100:3 | Density: 1.15±0.03 g/cm3 Model: HY-916 | Color: White | Hardness: 14±2 Shore A | Viscosity: 36000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 3.5 MPa | Tear Strength: 25±2 kN/m | Elongation: 570% | Mix Ratio: 100:2~100:3 | Density: 1.10±0.03 g/cm3

Application Scenarios Hardware Tools Factory: Wrenches, screwdrivers, pliers, tape measures, tool boxes. Metal hard plastic surfaces, brand logos specs, high volume continuous, edges cause wear. HY-912 25kN/m highest tear, life 30 to 50 percent longer, 4.0MPa tensile stable under high frequency. Automotive Parts Factory: Car buttons, instrument panels, interior trim, emblems. High quality consistency, 24 hour continuous, plastic curved surfaces. HY-912 340 percent elongation for slight curves, 30A stiffness, 25kN/m tear long life.

Operation Instructions

1. Prepare mold and materials
2. Weigh 100:2 to 100:3
3. Stir 3 to 5 minutes same direction
4. Vacuum degas 5 to 8 minutes
5. Pour slowly, vibrate mold
6. Cure 3 to 4h, rest 24h

Selection Guide HY-901 Economic: 30A, flat best value. HY-902 Medium: 30A, clearer transfer. HY-912 High Tear: 30A, 25kN/m highest, high volume. HY-916 Ultra Soft: 14A, deep concave irregular. HY-933 Addition: 34A, 9:1 mix, low shrinkage high precision fast cure.

Recommended Application Hardware tools and automotive parts high frequency high volume continuous production, high tear long pad life low overall cost.

Quality ISO 9001, COA report, RoHS REACH compliant.

Packaging 1kg, 5kg, 20kg, 25kg, 200kg.

Advantages Own production, 100 tons monthly, factory direct, stock available.

Ordering T/T and Paypal, 1 to 3 days delivery.

Support Technical consultation, custom formula.

Precautions Nitrile gloves, accurate weighing.

Storage Cool dry 5 to 30 degrees, 12 months.

FAQ Q: Pad life vs economic? A: 25kN/m 14 percent higher than 901, actual 30 to 50 percent longer on edged products, fewer changes efficiency gain. Q: 340 percent elongation for curves? A: Handles slight curves with stiffness, deep concave choose 916 ultra soft 570 percent. Q: vs 902 both 30A 4.0MPa? A: 912 higher tear longer life for edged high volume, 902 higher elongation better rebound clearer for curved high quality.