Resilient Pad Printing Silicone Rubber for Fine Logo on Curved Surfaces
$8- /Kilogram
| Payment Type: | Paypal,L/C,T/T |
| Incoterm: | FOB,CIF,EXW |
| Min. Order: | 1 Kilogram |
| Transportation: | Ocean,Land,Express |
| Port: | SHENZHEN |
English
$8- /Kilogram
| Payment Type: | Paypal,L/C,T/T |
| Incoterm: | FOB,CIF,EXW |
| Min. Order: | 1 Kilogram |
| Transportation: | Ocean,Land,Express |
| Port: | SHENZHEN |
Model No.: HY-902
| Selling Units | : | Kilogram |
| Package Type | : | 1/5/20/25/200KG |
| Picture Example | : |
|
The file is encrypted. Please fill in the following information to continue accessing it
White condensation cure compound for curved surface pad printing. Mix 100:2 to 100:3, work 30 to 40 min, cure 3 to 4 h at room temperature. The pad rebounds after each press and does not hold deformation, keeping fine artwork edges consistent. Made on our own line with regular stock for trial and bulk supply.

Core Selling Points • 430 percent elongation, quick rebound • Clean edge after repeated press • 30 Shore A balanced curved contact • 4.0MPa tensile, crack resistant under cycles • 24kN/m tear, longer pad life • 35000mPa.s viscosity, good leveling • Room temp cure 3 to 4 h • 1kg to 200kg packaging
Technical Parameters Model: HY-902 | Color: White | Hardness: 30±2 Shore A | Viscosity: 35000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 4.0 MPa | Tear Strength: 24±2 kN/m | Elongation: 430% | Mix Ratio: 100:2~100:3 | Density: 1.15±0.03 g/cm3 Model: HY-901 | Color: White | Hardness: 30±2 Shore A | Viscosity: 32000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 3.8 MPa | Tear Strength: 22±2 kN/m | Elongation: 380% | Mix Ratio: 100:2~100:3 | Density: 1.12±0.03 g/cm3 Model: HY-912 | Color: White | Hardness: 30±2 Shore A | Viscosity: 32000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 4.0 MPa | Tear Strength: 25±2 kN/m | Elongation: 340% | Mix Ratio: 100:2~100:3 | Density: 1.13±0.03 g/cm3 Model: HY-916 | Color: White | Hardness: 14±2 Shore A | Viscosity: 36000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 3.5 MPa | Tear Strength: 25±2 kN/m | Elongation: 570% | Mix Ratio: 100:2~100:3 | Density: 1.10±0.03 g/cm3
Detailed Application Scenarios Cosmetic bottle and cap surfaces: the pad stretches to fit the slight curve and rebounds, leaving a clean logo outline. Electronic plastic shells: balanced hardness transfers model numbers and small icons without smearing fine text.
Application and Operation Instructions
Selection Guide HY-901 flat small batch. HY-902 curved parts with clean edges. HY-912 high volume continuous run. HY-916 extra soft deep recesses.
Recommended Application Logo and fine text transfer on slightly curved bottles and shells.
Quality and Compliance ISO 9001, per batch inspection, COA available, RoHS REACH compliant.
Packaging Specifications 1kg, 5kg, 20kg, 25kg, 200kg drum.
Competitive Advantages Own production line, regular stock, stable delivery, trial to bulk packaging.
Ordering and Logistics T/T and Paypal accepted, trial pack available, bulk by agreed schedule.
Technical Support and Custom Service Grade matched to material, artwork and curve; formulation adjustment available.
Precautions Nitrile gloves, avoid sulfur amine phosphorus substances, weigh accurately.
Storage Cool dry sealed, 12 months.
FAQ Q: Flat simple artwork? A: HY-901. Q: Deep recess? A: HY-916. Q: Pad not recovering? A: Check ratio and cure.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.