Product Overview
Our Electronic Potting Silicone is specially developed for smart building automation systems, used to encapsulate, seal and protect control modules, sensors, PCB boards and communication components. As a professional supplier ofLiquid Silicone and Thermally Conductive Potting Compound, we provide a reliable alternative to traditional Epoxy Potting Resin. This formula is tailored for smart building working conditions—resisting moisture, dust, electromagnetic interference and temperature fluctuations, effectively protecting delicate electronic components, ensuring long-term stable operation of automation systems. Technical Specifications
This is a two-component electronic potting silicone (customizable parameters), available in addition-curing and condensation-curing types. Key properties:
- Operating temperature: -60℃ to 220℃, stable in extreme temperature environments
- Adhesion: Excellent bonding to PCB, PC, PMMA, aluminum, copper and stainless steel
- Performance: Low volatility, high strength, flame-retardant, high insulation (volume resistance ≥1×1015 Ω)
- Curing: Room temperature curing (full cure in 24 hours) or heated curing available
- Defoaming: Recommended at 0.01MPa for 3 minutes to ensure no air bubbles
- Customizable: Hardness, viscosity and operating time can be adjusted as needed
Product Features & Advantages
- Excellent Anti-Interference: High insulation performance, effectively shielding electromagnetic interference, ensuring precise signal transmission of smart building automation controllers and sensors.
- Wide Temperature Adaptability: Stable operation from -60℃ to 220℃, adapting to temperature changes in smart buildings, avoiding performance degradation due to extreme cold or heat.
- Superior Waterproof & Moisture-Proof: High sealing performance, preventing moisture and dust from entering components, suitable for various areas in smart buildings (e.g., basements, ventilation areas).
- Strong Adhesion & Low Shrinkage: Bonds firmly to various substrates, low shrinkage during curing, avoiding component detachment and ensuring long-term structural stability.
- Corrosion & Ozone Resistance: Resists chemical erosion and ozone aging, adapting to long-term use in smart building environments, extending component service life.
- Easy to Use: Simple mixing process, supports room temperature curing, adapting to mass production of smart building automation equipment.
How to Use (Step-by-Step)
- Pre-Mix Preparation: Fully stir Component A to evenly mix settled fillers, and shake Component B thoroughly before use to ensure uniform performance.
- Component Mixing: Mix Component A and Component B strictly according to the specified weight ratio, stirring continuously until homogeneous.
- Vacuum Defoaming: Place the mixed silicone in a vacuum container and defoam at 0.01MPa for 3 minutes to remove air bubbles.
- Curing Process: Pour the mixture into smart building automation components; cure at room temperature or heat to accelerate. Full curing takes 24 hours, with ambient temperature and humidity affecting curing speed.
Application Scenarios
This Electronic Potting Silicone is specifically designed for smart building automation systems, including HVAC control modules, lighting control panels, access control systems, temperature/humidity sensors and smart monitoring devices. It ensures stable operation of these components in various smart building environments. For purchasers, it reduces equipment failure rates, improves automation system reliability, extends service life, and lowers maintenance costs, boosting product competitiveness in the global smart building market.
Customization Options
We provide full customization for smart building automation requirements:
- Adjust curing hardness, viscosity and operating time to match different automation component sizes and production processes.
- Optimize anti-interference, thermal conductive and waterproof performance for specific smart building scenarios.
- Provide addition-curing or condensation-curing formulas based on component usage requirements.
- Support OEM & ODM services to meet personalized production needs.
Certifications & Compliance
Our Electronic Potting Silicone meets international electronic and smart building industry standards, with ISO 9001, CE, RoHS certifications. It has stable batch performance, is non-toxic, environmentally friendly and non-hazardous, widely trusted by global smart building equipment manufacturers and component suppliers.
FAQ
Q: Is this potting silicone suitable for smart building HVAC control modules?
A: Yes. It has excellent temperature adaptability and anti-interference performance, ensuring stable operation of HVAC control modules in varying temperature environments.
Q: How to store unused potting silicone?
A: Seal Component A and B separately, store in a cool and dry place. Mixed silicone should be used up at one time; stir well if layering occurs, which does not affect performance.
Q: Can it be customized for small-size smart sensors in buildings?
A: Yes. We can adjust viscosity and operating time to match small-size sensors, ensuring precise potting and full protection without affecting sensor sensitivity.
Q: Does it comply with smart building safety standards?
A: Yes. It is flame-retardant, high-insulation and non-toxic, complying with international smart building safety standards, ensuring safe use in building environments.
Shenzhen Hong Ye Jie Technology Co., Ltd
Contact Now
