Product Overview
High Flexural Modulus Electronic Potting Silicone, also named Electronic Potting Compound, silicone encapsulant and thermal conductive Potting Compound, is a rigid protective encapsulating material. After mixing with curing agent, the liquid silicone cures into a firm solid layer for encapsulating electronic components. This high rigidity protective silicone gel features excellent bending stiffness and forms reliable bonding with PC, PMMA, PCB and CPU substrates. HONG YE SILICONE provides this flexural modulus encapsulating material alongside our mold making silicone rubber for one-stop silicone sourcing. Technical Specifications
Two-component system, available in addition curing and condensation curing types.
Continuous operating temperature range: -60℃ to 220℃.
High flexural modulus, low volatile content, good thermal stability and stable electrical insulation.
Strong adhesion to aluminum, copper and stainless steel.
Hardness, viscosity and pot life can be adjusted upon request.
Product Features
- High flexural modulus and outstanding bending stiffness, resisting deformation under bending and mechanical load
- Waterproof, dustproof, corrosion-resistant and shockproof sealing protection with thermal conductivity for heat dissipation
- Relieves thermal cycling stress to protect chips and gold bonding wires
- Excellent ozone resistance and chemical erosion resistance
- Low volatiles and reliable adhesion to multiple metals
- Can be matched with our pad printing silicone for rigid electronic sealing projects
Application Scenarios
This high rigidity protective silicone gel suits encapsulation, sealing and filling of electronic parts that require anti-bending and structural support. It works for LED modules, circuit boards, sensors and power units. It helps buyers reduce component deformation risks, cut failure rates and extend service life. Many customers pair it with our liquid Silicone Foam to build composite protection solutions.
How to Use
- Stir Part A fully to redistribute settled fillers, and shake Part B evenly before mixing.
- Mix Part A and Part B strictly by the required weight ratio.
- Vacuum degas the mixture at 0.01MPa for around 3 minutes if bubble-free pouring is needed.
- Pour the compound onto components. It cures at room temperature or elevated temperature; full curing takes 24 hours. Ambient temperature and humidity affect curing speed.
Certifications and Compliance
This silicone encapsulant follows our factory quality system and meets ISO9001, CE and UL standards. Every batch goes through pre-production sample confirmation and final inspection before shipment.
Customization Options
Custom formulation is supported. Hardness, viscosity and working time can be tailored for your project, and OEM service is available for specialized electronic applications.
Production Process
Raw silicone materials are tested first, then compounded, stirred and monitored by QC. The finished potting compound passes lab performance tests before packing, with our thermal conductive silicone series manufactured under the same strict quality control standards.
FAQ
Q: What curing types are available?
A: We provide addition curing and condensation curing High Flexural Modulus Electronic Potting Silicone to
fit different processes and substrates.
Q: How should this potting silicone be stored?
A: Keep containers sealed tightly and use up the mixed compound promptly. Slight layer separation after long
storage is normal; stir thoroughly before use.
Q: Is this product dangerous?
A: It is non-hazardous. Avoid contact with mouth and eyes, and rinse with clean water right away if accidental
contact occurs.