Ms. zhou

What can I do for you?

Ms. zhou

What can I do for you?

Home> Products> Human Body Silicone> Fabric-Reinforced Robot Skin Silicone,
Fabric-Reinforced Robot Skin Silicone,
Fabric-Reinforced Robot Skin Silicone,
Fabric-Reinforced Robot Skin Silicone,

Fabric-Reinforced Robot Skin Silicone,

$10-16 /

Min. Order:1
Product Attributes

Model No.: HY-E610

Packaging & Delivery

The file is encrypted. Please fill in the following information to continue accessing it

Product Description
Product Overview Founded in 2006, Shenzhen Hong Ye Jie Technology Co., Ltd launches this fabric-reinforced robot skin silicone, a composite-grade addition-cure Liquid silicone rubber in our Human Body Silicone series. Joints, palms and bending edges are where ordinary thin silicone skin tears and cracks under repeated motion. This robot skin silicone fully bonds to an embedded nylon/polyester fabric backbone, using the fabric to carry tensile stress, so the composite thin skin resists tearing and stays intact at joints and high-stress parts. We also supply silicone rubber, RTV silicone, Foam Silicone and liquid silicone rubber for global robot makers.

Technical Specifications

  1. Two-component platinum-cured liquid silicone rubber, mix ratio A:B=1:1, cure at room or elevated temperature.
  2. Silicone fully impregnates and bonds to nylon/polyester fabric backing.
  3. Tear resistance and edge crack resistance greatly improved over unreinforced silicone.
  4. Hardness adjustable 0A–25A, soft realistic skin touch on the outer surface.
  5. Thin composite layer, suitable for joint and palm covering.
  6. Working temperature -60°C to 200°C, stable after repeated bending.

Product Features

  1. Fabric backbone reinforcement: Embedded fabric carries tensile stress, preventing tear propagation.
  2. Bend-resistant at joints: Resists cracking and splitting at elbow, shoulder and waist repeated motion.
  3. Thin but strong: Reinforced composite keeps a thin bionic look without sacrificing durability.
  4. Realistic outer touch: Fabric is hidden under a soft, natural silicone skin surface.
  5. Eco-friendly formula: Platinum-cured, non-toxic, meets RoHS and REACH standards.

How to Use

  1. Lay fabric backing in mold before casting, or laminate fabric onto cured skin later.
  2. Stir component A and B separately until uniform.
  3. Mix A:B at 1:1 weight ratio, stir 2–3 minutes, vacuum degas.
  4. Pour or coat over the fabric, ensure full impregnation, then cure at room temperature or by heating.
  5. Demold to obtain finished fabric-reinforced bionic robot skin.

Application Scenarios Humanoid robot elbow/shoulder/waist joint skin, palm and fingertip reinforced skin, high-stress bionic parts on service robots, prosthetic limb bend zones, simulation mannequin moving joints, and any thin skin subject to repeated stretching and bending.

Value to Buyers Joint skin tears and splits are a common after-sales failure in humanoid robots. This fabric-reinforced robot skin silicone extends skin service life at stress parts, reduces cracking returns, and keeps a thin realistic appearance. We provide free samples, tear-strength data and composite lamination guidance.

Certifications & Compliance Factory holds ISO9001 certification. Material meets RoHS and REACH standards. Strict incoming inspection, first-article check and pre-shipment inspection on every batch.

Customization Options Custom fabric type, reinforcement density, hardness, color and skin tone available. We can adjust viscosity for impregnation coating or LSR overmolding, and provide OEM/ODM supply.

FAQ

Q1: How does the fabric reinforce the silicone?

A1: Silicone fully bonds to the embedded fabric; the fabric carries tensile stress and stops tear propagation.

Q2: Will joint skin split after repeated bending?

A2: No, the reinforced composite resists edge cracking and splitting at repeated motion.

Q3: Does the fabric show through on the surface?

A3: No, fabric is hidden under a soft, natural silicone outer skin.

Q4: Is the outer surface still soft and realistic?

A4: Yes, hardness 0A–25A adjustable, outer touch stays soft and realistic.

Home> Products> Human Body Silicone> Fabric-Reinforced Robot Skin Silicone,
  • Send Inquiry

Copyright © 2026 Shenzhen Hong Ye Jie Technology Co., Ltd All rights reserved. Privacy Policy

Send Inquiry
*
*

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send