Flame Retardant V0 Robot Skin Silicone

Product Overview Founded in 2006, Shenzhen Hong Ye Jie Technology Co., Ltd launches this flame-retardant robot skin silicone, a high-grade addition-cure Liquid silicone rubber in our Human Body Silicone series. Public service robots work in crowded indoor spaces, where the outer skin must not only look realistic but also meet strict fire safety standards. This robot skin silicone reaches UL94 V0 flame retardancy, produces low smoke when burning, and provides good electrical insulation, effectively lowering fire risks from internal electronics. We also supply silicone rubber, RTV silicone, Foam Silicone and liquid silicone rubber for global robot makers.

Technical Specifications

1. Two-component platinum-cured liquid silicone rubber, mix ratio A:B=1:1, cure at room or elevated temperature.
2. Flame retardancy reaches UL94 V0 level, self-extinguishing immediately after ignition.
3. Low smoke emission during combustion, no toxic corrosive gas.
4. Good electrical insulation, volume resistivity high, safe covering for embedded circuits.
5. Hardness adjustable 0A–25A, realistic soft skin touch.
6. Working temperature -65℃~200℃, stable after thermal cycling.

Product Features

1. UL94 V0 flame retardancy: Self-extinguishes immediately when exposed to flame, greatly reducing fire spread risk in public robot applications.
2. Low smoke & low toxicity: Produces little smoke and no corrosive gas when burning, protecting people in public spaces.
3. Electrical insulation: High insulation resistance protects embedded electronics from short circuits and leakage.
4. Realistic bionic touch: Flame retardancy is achieved without hardening the material; soft skin feel is retained.
5. Stable molding performance: Good fluidity for pouring and brush coating on curved robot outer skin.

How to Use

1. Stir component A and B separately until uniform.
2. Mix A:B at 1:1 weight ratio and stir 2–3 minutes.
3. Vacuum degas to remove bubbles.
4. Pour or brush-coat within pot life, then cure at room temperature or by heating.
5. Demold to obtain finished flame-retardant bionic robot skin.

Application Scenarios Public service robot outer skin, shopping mall guide robots, station & airport reception robots, hospital delivery robots, exhibition demonstration robots, companion robots in public areas, and bionic parts requiring fire safety and electrical insulation.

Value to Buyers Public robots must pass stricter fire and electrical safety audits. This flame-retardant V0 robot skin silicone helps robot makers meet public-space safety requirements, reduces fire liability risk, and improves product acceptance in malls, hospitals and transport hubs. We provide free samples, flame-retardant test reports and molding technical support.

Certifications & Compliance Factory holds ISO9001 certification. Material meets UL94 V0, RoHS and REACH standards, with good electrical insulation properties. Strict incoming inspection, first-article check and pre-shipment inspection on every batch.

Customization Options Custom hardness, color, skin tone and flame-retardant grade available. We can adjust viscosity for pouring, brush coating or LSR injection molding, and provide OEM/ODM supply.

FAQ Q1: Does this silicone really reach UL94 V0?

A1: Yes, it is tested to UL94 V0, self-extinguishing immediately after flame removal.

Q2: Will flame retardancy make the skin hard and unnatural?

A2: No, we add flame retardants without sacrificing softness; the material keeps realistic skin touch.

Q3: Is it safe near internal circuits?

A3: It has good electrical insulation, protecting embedded circuits from short circuits and leakage.

Q4: Can it be color-matched for skin tone? A4: Yes, custom skin tone and solid colors are available.