Medium Grade Pad Printing Silicone 30 Shore A Good Rebound Clear Pattern for Mid High End Printing

Core Selling Points • Medium grade good rebound clear pattern • 30 Shore A standard hardness • 4.0MPa tensile strong durable • 24kN per m tear good resistance • 430 percent elongation highest 30A • 35000 viscosity finer surface • Quick rebound sharp edges • Fine text logos complete • 30 to 40 min operation • Room temp 3 to 4h cure • 100:2 to 100:3 mix • Balances cost and quality

Technical Parameters Model: HY-902 | Color: White | Hardness: 30±2 Shore A | Viscosity: 35000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 4.0 MPa | Tear Strength: 24±2 kN/m | Elongation: 430% | Mix Ratio: 100:2~100:3 | Density: 1.15±0.03 g/cm3 Model: HY-901 | Color: White | Hardness: 30±2 Shore A | Viscosity: 32000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 3.8 MPa | Tear Strength: 22±2 kN/m | Elongation: 380% | Mix Ratio: 100:2~100:3 | Density: 1.12±0.03 g/cm3 Model: HY-912 | Color: White | Hardness: 30±2 Shore A | Viscosity: 32000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 4.0 MPa | Tear Strength: 25±2 kN/m | Elongation: 340% | Mix Ratio: 100:2~100:3 | Density: 1.13±0.03 g/cm3 Model: HY-916 | Color: White | Hardness: 14±2 Shore A | Viscosity: 36000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 3.5 MPa | Tear Strength: 25±2 kN/m | Elongation: 570% | Mix Ratio: 100:2~100:3 | Density: 1.10±0.03 g/cm3

Application Scenarios Mid High End Electronics: Branded remotes, premium chargers, earphone cases, smart watch bands, game controllers. Fine logos key symbols, high clarity edge sharpness. HY-902 good rebound 430 percent elongation, quick recovery, clear sharp patterns, 35000 viscosity finer surface even ink. Cosmetic Packaging: Perfume caps, lipstick tubes, powder compacts, eye cream bottles. High brand image, delicate logos, high clarity color fullness edge fineness. HY-902 good rebound clear transfer, 430 percent elongation for curved surfaces.

Operation Instructions

1. Prepare mold and materials
2. Weigh 100:2 to 100:3
3. Stir 3 to 5 minutes same direction
4. Vacuum degas 5 to 8 minutes
5. Pour slowly, vibrate mold
6. Cure 3 to 4h, rest 24h

Selection Guide HY-901 Economic: 30A, flat best value. HY-902 Medium: 30A, clearer transfer, mid high end. HY-912 High Tear: 30A, 25kN/m highest, high volume. HY-916 Ultra Soft: 14A, deep concave irregular.

Recommended Application Mid high end electronics and cosmetic packaging fine logo text printing, good rebound clear sharp patterns.

Quality ISO 9001, COA report, RoHS REACH compliant.

Packaging 1kg, 5kg, 20kg, 25kg, 200kg.

Advantages Own production, 100 tons monthly, factory direct, stock available.

Ordering T/T and Paypal, 1 to 3 days delivery.

Support Technical consultation, custom formula.

Precautions Nitrile gloves, accurate weighing.

Storage Cool dry 5 to 30 degrees, 12 months.

FAQ Q: vs 901 printing effect? A: 901 meets basic regular needs, 902 better rebound clearer sharper fine logos text, choose 902 for high quality. Q: Where shows good rebound? A: Quick recovery after compression no deformation, patterns stay clear sharp every print no faint. Q: Curved surfaces? A: 430 percent for moderate curves, 916 for deep concave irregular.