Ms. zhou

What can I do for you?

Ms. zhou

What can I do for you?

Home> Products> Pad Printing Silicone> Soft Pad Printing Silicone High Elongation HONG YE SILICONE
Soft Pad Printing Silicone High Elongation HONG YE SILICONE
Soft Pad Printing Silicone High Elongation HONG YE SILICONE
Soft Pad Printing Silicone High Elongation HONG YE SILICONE
Soft Pad Printing Silicone High Elongation HONG YE SILICONE
Soft Pad Printing Silicone High Elongation HONG YE SILICONE
Soft Pad Printing Silicone High Elongation HONG YE SILICONE
Soft Pad Printing Silicone High Elongation HONG YE SILICONE

Soft Pad Printing Silicone High Elongation HONG YE SILICONE

$8- /Kilogram

Payment Type:Paypal,D/P,L/C
Incoterm:EXW,CIF,FOB,DDP
Min. Order:1 Kilogram
Transportation:Ocean,Land,Air,Express
Port:SHENZHEN
Product Attributes

Model No.: HY-916

Packaging & Delivery
Selling Units : Kilogram
Package Type : 1/5/20/25/200KG
Picture Example :

The file is encrypted. Please fill in the following information to continue accessing it

Product Description

Soft Pad Printing Silicone for Coated Parts HONG YE SILICONE

Product Summary Two component condensation cure silicone at 14±2 Shore A with 570% elongation. The pad spreads along compound curvature, tear strength 25±2 kN/m holds for full shifts, mix ratio 100:2 and room temperature cure.

_Pad_Printing_Silicone1

Product Overview Deformation is the design target here, not force. At 14±2 Shore A the pad follows the part instead of touching high points only, so recesses and corner transitions gain contact. Elongation 570% keeps that ability through a full shift, and tear strength 25±2 kN/m protects tips during demoulding. Viscosity 36000±2000 mPa.s deairs in minutes, leaving no pin holes in the moulded pad. The grade shares its handling with our mould making silicone and Liquid silicone rubber lines.

Technical Specifications Model: HY-916 | Color: White | Hardness: 14±2 Shore A | Viscosity: 36000±2000 mPa.s | Operation Time: 30~40 min | Cure Time: 3~4 h | Tensile Strength: 3.5 MPa | Tear Strength: 25±2 kN/m | Elongation: 570% | Mix Ratio: 100:2 | Density: 1.10±0.03 g/cm3 Model: HY-901 | Color: White | Hardness: 30±2 Shore A | Viscosity: 32000±2000 mPa.s | Operation Time: 30~40 min | Cure Time: 3~4 h | Tensile Strength: 3.8 MPa | Tear Strength: 22±2 kN/m | Elongation: 380% | Mix Ratio: 100:2 | Density: 1.12±0.03 g/cm3 Model: HY-902 | Color: White | Hardness: 30±2 Shore A | Viscosity: 35000±2000 mPa.s | Operation Time: 30~40 min | Cure Time: 3~4 h | Tensile Strength: 4.0 MPa | Tear Strength: 24±2 kN/m | Elongation: 430% | Mix Ratio: 100:2 | Density: 1.15±0.03 g/cm3 Model: HY-912 | Color: White | Hardness: 30±2 Shore A | Viscosity: 32000±2000 mPa.s | Operation Time: 30~40 min | Cure Time: 3~4 h | Tensile Strength: 4.0 MPa | Tear Strength: 25±2 kN/m | Elongation: 340% | Mix Ratio: 100:2 | Density: 1.13±0.03 g/cm3

Product Features • Contact footprint expands across compound curvature • Elongation 570% reaches recesses and narrow strips • Tear strength 25±2 kN/m survives high cycle demoulding • 100:2 ratio keeps weighing simple on the line • Deairs in minutes, no pin holes in the pad • Room temperature cure, no oven required • Gentle pressure for matte and coated surfaces • Consistent handling with Potting Compound and Human Body Silicone grades

How to Use

  1. Weigh A and B at 100:2. 2. Stir 2~3 minutes in one direction. 3. Vacuum 3~5 minutes. 4. Pour continuously from one corner. 5. Cure 3~4 hours at room temperature, then rest 24 hours.

Application Scenarios Helmet shells, protective gear and coated panels with compound curvature. Toy heads and assembly parts with recessed details that hard pads leave blank.

Value to Buyers Lower cost through fewer rejects and less material loss, higher efficiency through removal of the second press from the route, better yield because the pad holds geometry from the first hour to the last.

Certifications and Compliance ISO9001 system, UL and CE related listings, batch testing before shipment, COA with every lot, RoHS and REACH related reports for export.

Customization Options Hardness and colour adjustment, OEM labelling, packaging from 1 kg to 200 kg drums, and an addition cure grade at 9:1 for higher dimensional stability.

Production Process Incoming inspection, compounding on 20 lines, vacuum deairing, filtration, moulded sampling, batch testing, filling and final inspection, each batch traceable to raw material lot.

FAQ Q: Does a soft pad wear faster? A: Tear strength 25±2 kN/m keeps geometry stable under normal pressure. Q: Is an oven needed? A: No, cure takes 3~4 hours at room temperature.

Home> Products> Pad Printing Silicone> Soft Pad Printing Silicone High Elongation HONG YE SILICONE
  • Send Inquiry

Copyright © 2026 Shenzhen Hong Ye Jie Technology Co., Ltd All rights reserved. Privacy Policy

Send Inquiry
*
*

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send