HONG YE SILICONE Electronic Potting is a high-performance Silicone Potting Compound designed for underwater pump monitors, a core Silicone raw material with excellent deep-water waterproof, corrosion resistance and underwater insulation. As a premium Electronic Encapsulation Adhesive, this dual-component Addition Curing Silicone features adjustable parameters, strong adhesion and stable curing. Fully complying with ISO, CE and RoHS standards, it provides reliable protection for underwater pump monitor components, ensuring safe and stable operation in long-term submerged environments, meeting global underwater equipment manufacturer demands.
Product Overview
Our Electronic Potting, also called potting glue or encapsulation silicone, is a high-performance Silicone Encapsulant specially engineered for underwater pump monitors—the critical component monitoring underwater pump operation status. As a professional supplier of Thermally Conductive Potting Compound and industrial silicone solutions, we optimize this product for underwater scenarios: it bonds perfectly to PC, PMMA, PCB and metals (aluminum, copper, stainless steel), with excellent waterproof, moisture-proof, corrosion-resistant, insulation and shock absorption performance. It effectively protects monitor electronics from long-term submersion, water pressure, chemical corrosion and temperature changes, ensuring accurate data transmission and reliable operation of underwater pumps. Technical Specifications
Our Electronic Potting has stable performance with fully customizable parameters; key specifications are as follows: it is a dual-component addition-curing liquid silicone (A and B), with A component needing full stirring to mix settled fillers evenly and B component needing thorough shaking. The weight ratio of A and B components is adjustable, with optional vacuum defoaming (0.01MPa for 3 minutes) before pouring. It supports room-temperature or heated curing, with basic curing for next-process operation and full curing within 24 hours (environment temperature and humidity affect curing speed). It operates continuously from -60℃ to 220℃, with high dielectric strength, volume resistivity, low volatility, high strength and excellent adhesion. Shelf life is 12 months when sealed, non-hazardous for general chemical transportation. Product Features & Advantages
- Deep-Water Waterproof Performance: Excellent sealing and waterproof ability, effectively isolating water and moisture even in long-term submerged environments, preventing water ingress and short circuits of underwater pump monitor components.
- Strong Corrosion Resistance: Resists corrosion from water, aquatic chemicals and impurities, adapting to various underwater environments (freshwater, seawater, industrial wastewater), extending monitor service life.
- Superior Underwater Insulation: High dielectric strength and volume resistivity, ensuring reliable electrical insulation in underwater environments, avoiding leakage and ensuring safe operation of monitoring systems.
- Wide Temperature Adaptability: Stable performance from -60℃ to 220℃, resisting extreme temperature changes in underwater environments, avoiding performance degradation in cold or high-temperature water.
- Strong Adhesion & Low Volatility: Bonds firmly to various underwater pump materials, with high structural strength; low volatile content, no contamination to precision electronic components or water environments.
- Dual Curing & Customizable: Available in addition-curing and condensation-curing types, with adjustable curing speed and viscosity, adapting to underwater pump monitor production workflows.
How to Use (Step-by-Step)
- Pre-Mix Preparation: Thoroughly stir Component A to mix settled fillers evenly, and shake Component B thoroughly to ensure uniform viscosity; slight stratification during storage does not affect performance after stirring.
- Component Mixing: Strictly mix Component A and Component B according to the specified weight ratio, stirring continuously until homogeneous to ensure optimal curing effect and waterproof performance.
- Vacuum Defoaming: After mixing evenly, place the mixed glue in a vacuum container and defoam at 0.01MPa for 3 minutes to remove air bubbles, ensuring dense, bubble-free encapsulation and no water ingress gaps.
- Curing Process: Pour the defoamed glue into underwater pump monitor components, cure at room temperature or heat. Proceed to the next process after basic curing, and ensure full curing (24 hours) for optimal waterproof and protective performance.
Application Scenarios
This Electronic Potting is specifically designed for underwater pump monitors, including industrial underwater pumps, sewage pumps, marine pumps and freshwater pump monitoring systems, suitable for encapsulating their control boards, sensors, signal transmitters and control modules. It is also applicable to other underwater electronic components that require waterproof, anti-corrosion and insulation. For underwater equipment purchasers, it enhances monitor reliability, reduces failure rates caused by long-term submersion and corrosion, extends service life, ensures stable underwater pump operation, lowers maintenance and replacement costs, and boosts competitiveness in the global underwater equipment market.
Customization Options
We provide full customization for underwater pump monitor requirements:
- Adjust curing hardness, viscosity and operating time to match different underwater pump monitor sizes and production processes.
- Optimize waterproof and corrosion resistance to adapt to different underwater environments (freshwater, seawater, industrial wastewater).
- Customize A/B component mixing ratio and curing speed to meet underwater pump equipment mass production needs.
- Provide flexible packaging specifications to meet small-batch R&D and large-scale production supply needs.
Certifications & Compliance
Our Electronic Potting meets international underwater equipment and electronic industry standards, holding ISO 9001, CE and RoHS certifications. It has stable batch performance, is non-toxic, non-hazardous and environmentally friendly, non-polluting to water environments, undergoing strict quality testing to ensure consistency and reliability, widely trusted by global underwater equipment manufacturers and suppliers.
Production Process
Our production process adheres to strict industrial-grade quality standards: selecting high-purity Silicone raw materials, precise mixing of A/B components, vacuum defoaming, strict viscosity and hardness testing, and professional packaging. Each batch undergoes rigorous performance testing (waterproof, corrosion resistance, insulation) to ensure it meets underwater pump monitor application requirements, demonstrating our strong production capacity and quality assurance system. FAQ
Q: Is this potting suitable for long-term submerged underwater pump monitors?
A: Yes. It has excellent deep-water waterproof and sealing performance, able to withstand long-term submersion, effectively isolating water and protecting monitor components from water damage.
Q: How to store this potting silicone properly?
A: Seal and store in a cool, dry place; mixed glue should be used up at one time to avoid waste. Stratification during storage can be solved by stirring evenly, which does not affect performance.
Q: Can it resist corrosion in seawater or industrial wastewater?
A: Yes. It has strong corrosion resistance, adapting to seawater, industrial wastewater and other harsh underwater environments, preventing monitor components from being corroded and extending service life.
Q: Can the product be customized for different underwater pump monitor sizes?
A: Yes. We can customize curing hardness, viscosity and operating time to perfectly match your underwater pump monitor size, production process and underwater application environment.
Shenzhen Hong Ye Jie Technology Co., Ltd
Contact Now
