HONG YE SILICONE Electronic Potting is a high-performance Silicone Potting Compound designed for electric gate openers, a core Silicone raw material with excellent outdoor weather resistance, impact resistance and electrical insulation. As a premium Electronic Encapsulation Adhesive, this dual-component Addition Curing Silicone features adjustable parameters, strong adhesion and stable curing. Fully complying with ISO, CE and RoHS standards, it provides reliable protection for electric gate opener components, ensuring safe and stable operation in outdoor and high-frequency use scenarios, meeting global access control equipment manufacturer demands.
Product Overview
Our Electronic Potting, also called potting glue or encapsulation silicone, is a high-performance Silicone Encapsulant specially engineered for electric gate openers—the core component of commercial, residential and industrial access control systems. As a professional supplier of Thermally Conductive Potting Compound and industrial silicone solutions, we optimize this product for gate opener scenarios: it bonds perfectly to PC, PMMA, PCB and metals (aluminum, copper, stainless steel), with excellent waterproof, moisture-proof, corrosion-resistant, insulation and shock absorption performance. It effectively protects gate opener electronics from outdoor weather, mechanical impact, dust and voltage fluctuations, ensuring smooth gate operation and accurate access control signal transmission. Technical Specifications
Our Electronic Potting has stable performance with fully customizable parameters; key specifications are as follows: it is a dual-component addition-curing liquid silicone (A and B), with A component needing full stirring to mix settled fillers evenly and B component needing thorough shaking. The weight ratio of A and B components is adjustable, with optional vacuum defoaming (0.01MPa for 3 minutes) before pouring. It supports room-temperature or heated curing, with basic curing for next-process operation and full curing within 24 hours (environment temperature and humidity affect curing speed). It operates continuously from -60℃ to 220℃, with high dielectric strength, volume resistivity, low volatility, high strength and excellent adhesion. Shelf life is 12 months when sealed, non-hazardous for general chemical transportation. Product Features & Advantages
- Excellent Outdoor Weather Resistance: Resists rain, snow, high temperature, cold and ozone, adapting to long-term outdoor use, avoiding performance degradation caused by harsh weather and extending electric gate opener service life.
- Strong Impact & Vibration Resistance: Absorbs mechanical impact and vibration during gate opening/closing, protects control board chips and welding wires from damage, ensuring stable gate operation.
- Superior Electrical Insulation: High dielectric strength and volume resistivity, preventing short circuits caused by voltage fluctuations or moisture, ensuring safe operation of gate opener control systems.
- Strong Adhesion & Low Volatility: Bonds firmly to various electric gate materials, with high structural strength; low volatile content, no contamination to precision electronic components, ensuring long-term stability.
- Wide Temperature Adaptability: Stable performance from -60℃ to 220℃, adapting to extreme temperature changes in different regions, avoiding curing failure or performance loss in cold or high-temperature environments.
- Dual Curing & Customizable: Available in addition-curing and condensation-curing types, with adjustable curing speed and viscosity, adapting to electric gate opener mass production workflows.
How to Use (Step-by-Step)
- Pre-Mix Preparation: Thoroughly stir Component A to mix settled fillers evenly, and shake Component B thoroughly to ensure uniform viscosity; slight stratification during storage does not affect performance after stirring.
- Component Mixing: Strictly mix Component A and Component B according to the specified weight ratio, stirring continuously until homogeneous to ensure optimal curing effect and insulation performance.
- Vacuum Defoaming: After mixing evenly, place the mixed glue in a vacuum container and defoam at 0.01MPa for 3 minutes to remove air bubbles, ensuring dense, bubble-free encapsulation and no moisture ingress gaps.
- Curing Process: Pour the defoamed glue into electric gate opener components, cure at room temperature or heat. Proceed to the next process after basic curing, and ensure full curing (24 hours) for optimal protective performance.
Application Scenarios
This Electronic Potting is specifically designed for electric gate openers, including residential electric gates, commercial access gates, industrial sliding gates and swing gate openers, suitable for encapsulating their control boards, sensors, signal receivers and drive modules. It is also applicable to other access control electronic components that require outdoor weather resistance and insulation. For access control equipment purchasers, it enhances gate opener reliability, reduces failure rates caused by outdoor weather and mechanical impact, extends service life, ensures smooth gate operation, lowers maintenance costs, and boosts competitiveness in the global access control market.
Customization Options
We provide full customization for electric gate opener requirements:
- Adjust curing hardness, viscosity and operating time to match different electric gate opener sizes and production processes.
- Optimize impact resistance and weather resistance to adapt to different outdoor environments (residential, commercial, industrial).
- Customize A/B component mixing ratio and curing speed to meet electric gate opener mass production needs.
- Provide flexible packaging specifications to meet small-batch R&D and large-scale production supply needs.
Certifications & Compliance
Our Electronic Potting meets international access control equipment and electronic industry standards, holding ISO 9001, CE and RoHS certifications. It has stable batch performance, is non-toxic, non-hazardous and environmentally friendly, undergoing strict quality testing to ensure consistency and reliability, widely trusted by global electric gate opener manufacturers and suppliers.
Production Process
Our production process adheres to strict industrial-grade quality standards: selecting high-purity Silicone raw materials, precise mixing of A/B components, vacuum defoaming, strict viscosity and hardness testing, and professional packaging. Each batch undergoes rigorous performance testing (weather resistance, insulation, impact resistance) to ensure it meets electric gate opener application requirements, demonstrating our strong production capacity and quality assurance system. FAQ
Q: Is this potting suitable for outdoor electric gate openers in rainy or snowy areas?
A: Yes. It has excellent waterproof and weather resistance, effectively isolating rain, snow and moisture, preventing water ingress and short circuits, ensuring stable operation in harsh outdoor environments.
Q: How to store this potting silicone properly?
A: Seal and store in a cool, dry place; mixed glue should be used up at one time to avoid waste. Stratification during storage can be solved by stirring evenly, which does not affect performance.
Q: Can it resist impact during gate opening and closing?
A: Yes. It has strong shock absorption performance, effectively absorbing mechanical impact and vibration during gate operation, protecting control components from damage and ensuring smooth operation.
Q: Can the product be customized for different electric gate opener models?
A: Yes. We can customize curing hardness, viscosity and operating time to perfectly match your electric gate opener model, production process and outdoor application environment.
Shenzhen Hong Ye Jie Technology Co., Ltd
Contact Now
