HONG YE SILICONE Electronic Potting Compound for LED Displays (Model HY-9045) is a two-component 1:1 Addition Curing Silicone designed for LED modules and screens. It features excellent flame retardancy, insulation, waterproofing and weather resistance, with low shrinkage, no exotherm and no corrosion during curing. It supports room-temperature or heating curing, stable performance in wide temperatures, and meets international safety standards. Ideal for LED display potting and sealing, it supports bulk packaging and customized formulations for global B2B buyers.
Product Overview
Our Electronic Potting Compound, also known as Silicone Potting Compound and Electronic Encapsulation Adhesive, is a flame-retardant liquid silicone specially developed for LED display applications. Unlike traditional epoxy potting resin, it cures with low exotherm, non-corrosive and minimal shrinkage, providing safe long-term protection for LED pixels, PCBs and driver modules. Made with stable Silicone raw materials, it delivers reliable insulation, waterproofing and anti-aging performance. It is widely used in LED displays, advertising light boxes, power modules and wind turbine electronics. Product Features
1. Excellent flame retardancy, elasticity and insulation over a wide temperature range, ensuring safe operation of LED display electronics.
2. Waterproof, moisture-proof, dust-proof, anti-yellowing and weather-resistant, adapting to indoor and outdoor LED display environments.
3. Low heat release, non-corrosive and low shrinkage during curing, avoiding damage to LED components and ensuring stable performance.
4. Supports both room-temperature and heating curing, flexible to match different production schedules and environments.
5. Strong adhesion to PCB, plastics and metals, ensuring tight sealing without peeling or loosening during long-term use.
6. Suitable for automated potting lines, improving production efficiency for mass LED display manufacturing.
Technical Specifications
Model: HY-9045; Type: Addition curing silicone; Mixing Ratio: 1:1 (Component A: Component B); Appearance: Liquid (both A and B components); Viscosity: 2500±500 Pa.s; Hardness: 45±5 Shore A; Operating Time (25℃): 30–60 minutes; Curing Time (80℃): 4–5 hours; Dielectric Strength: ≥25 kV/m; Dielectric Constant (1.2MHz): 3.0; Volume Resistivity: ≥1×10¹⁵ Ω. Note: Hardness, viscosity and operating time can be fully customized according to customer needs.
How to Use
1. Pre-mixing: Stir Component A and Component B separately in their original containers to ensure uniform mixing of fillers and ingredients.
2. Mixing: Mix Component A and Component B at a 1:1 weight ratio, stirring thoroughly until fully fused without lumps.
3. Defoaming: Put the mixed compound into a vacuum container and degas at 0.08 MPa for 3 minutes to remove bubbles, ensuring no gaps during potting.
4. Potting & Curing: Pour the defoamed glue into LED display components, cure at room temperature or with heating. In cold weather, properly increase the temperature to accelerate curing.
Application Scenarios
Widely applied for potting, sealing and fixing of electronic components in various LED-related products, including indoor and outdoor LED displays, LED advertising screens, LED modules, LED light boxes, electronic control boards, power supply modules, wind energy motors and PCB substrates. It provides stable protection against moisture, dust, UV radiation and outdoor aging, greatly improving the reliability and service life of LED displays.
Certifications and Compliance
This product is produced under HONG YE SILICONE’s strict quality management system, complying with CE, RoHS and international flame-retardant and electronic safety standards. It is non-toxic, non-hazardous and environmentally friendly, ensuring smooth customs clearance and market access in global LED display markets.
Customization & Packaging
Customization Options: Adjustable cured hardness, colloid viscosity, operating time and flame-retardant level, tailored to meet the specific needs of LED display production. Packaging Specifications: 5kg, 20kg, 25kg, 200kg, suitable for bulk B2B procurement and mass industrial production.
FAQ
Q1: Is this product suitable for outdoor LED displays?
A1: Yes, it has excellent waterproof, anti-aging and weather-resistant properties, adapting to harsh outdoor environments such as rain, dust and UV radiation.
Q2: Can curing be accelerated in winter?
A2: Yes, you may properly heat the mixed compound or the production environment to speed up the curing process, ensuring production efficiency.
Q3: How should the unopened product be stored?
A3: Seal and store in a cool, dry place below 25℃; the shelf life is 12 months. If the colloid is layered after long-term storage, stir evenly before use, which will not affect the product performance.
Q4: What materials should be avoided during use?
A4: Avoid contact with organotin compounds, sulfur and sulfides, amine compounds, incompletely cured condensation silicone, amine-cured epoxy resin and solder flux, as these materials may cause the product to fail to cure.
Q5: Is it suitable for automated LED display production lines?
A5: Yes, it has a 1:1 mixing ratio, simple mixing and defoaming process, which is perfectly compatible with automated potting lines, improving production efficiency and product consistency.
Shenzhen Hong Ye Jie Technology Co., Ltd
Contact Now
