Hongye Silicone HY-912 Pad Printing Silicone High Tear Wear Resistant Long Life

Core Selling Points • 25 plus or minus 2 kN per m tear strength, highest in series • Head life more than 30 percent longer than ordinary models • 4.0 MPa tensile, good rebound clear transfer • 30 Shore A medium hardness, wide application • 32000 mPa.s viscosity, good flow low bubble • 30 to 40 minutes operation, 3 to 4 hours room cure • Uniform ink pickup, sharp clear patterns • Excellent wear resistance for high frequency production • Accurate multi color registration • Factory direct stock supply

Technical Parameters Model: HY-912 | Color: White | Hardness: 30±2 Shore A | Viscosity: 32000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 4.0 MPa | Tear Strength: 25±2 kN/m | Elongation: 340% | Mix Ratio: 100:2~100:3 | Density: 1.13±0.03 g/cm3 Model: HY-901 | Color: White | Hardness: 30±2 Shore A | Viscosity: 32000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 3.8 MPa | Tear Strength: 22±2 kN/m | Elongation: 380% | Mix Ratio: 100:2~100:3 | Density: 1.12±0.03 g/cm3 Model: HY-902 | Color: White | Hardness: 30±2 Shore A | Viscosity: 35000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 4.0 MPa | Tear Strength: 24±2 kN/m | Elongation: 430% | Mix Ratio: 100:2~100:3 | Density: 1.15±0.03 g/cm3 Model: HY-916 | Color: White | Hardness: 14±2 Shore A | Viscosity: 36000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 3.5 MPa | Tear Strength: 25±2 kN/m | Elongation: 570% | Mix Ratio: 100:2~100:3 | Density: 1.10±0.03 g/cm3

Detailed Application Scenarios

Large Toy Factory Production HY-912 heads withstand high frequency extrusion without cracking, life over 5000 times, 30 percent longer than ordinary models, reducing replacement and downtime for large toy production with dozens of machines running daily.

Electronic Accessories Printing HY-912 heads maintain stable performance in continuous high speed printing, patterns always clear and sharp, consistent quality, low defective rate, accurate multi color registration for electronic accessories.

Application and Operation Instructions Step 1: Prepare clean mold and tools, wear nitrile gloves. Step 2: Weigh A and B at 100:2 to 100:3 accurately. Step 3: Stir slowly same direction 2 to 3 minutes. Step 4: Vacuum defoam at negative 0.1 MPa 3 to 5 minutes. Step 5: Pour slowly from mold side, avoid bubbles. Step 6: Cure 3 to 4 hours room temp, demold, rest 24 hours.

Selection Guide HY-901 economy for small batch. HY-902 medium balanced for most production. HY-912 high tear for high frequency large volume. HY-916 ultra soft for irregular deep concave surfaces.

Recommended Application Most recommended for high frequency large volume pad printing in toy and electronic accessory production.

Quality and Compliance ISO 9001 certified, COA reports, RoHS REACH compliant, non toxic safe.

Packaging Specifications 1kg trial, 5kg, 20kg, 25kg, 200kg drum. A and B separate.

Competitive Advantages Own production base, sufficient output, stock supply, direct price, twenty plus years experience.

Ordering and Logistics T/T Paypal accepted. Samples available. Stock ships 1 to 3 days. Express sea air options.

Technical Support and Customization Experienced team provides guidance. Custom formulation for hardness viscosity adjustments.

Precautions Wear nitrile gloves. Avoid tin sulfur amine. Accurate weighing. Use within operation time.

Storage Cool dry place, avoid sunlight. 12 months shelf life unopened.

Frequently Asked Questions Q: Difference between HY-912 and HY-902? A: HY-912 has higher tear strength and longer head life, slightly lower elongation, for high frequency production. Q: Head life? A: Average over 5000 times under normal use. Q: For irregular surfaces? A: Suitable for conventional irregular surfaces, use HY-916 for extreme cases.