Hongye Silicone HY-901 Economic Pad Printing Silicone 30 Shore A White for Toy Housing Logo Transfer

Core Selling Points • Economic grade competitive price for small medium production • 30 Shore A medium hardness for flat and slightly curved surfaces • White color for easy ink observation • 32000 mPa.s viscosity good flow low bubbles • 3.8 MPa tensile strength durable pad heads • 22 kN/m tear strength stable performance • 380 percent elongation good rebound • Room temperature condensation cure simple operation • 30 to 40 min operation time 3 to 4 h cure • Ready stock 1 kg to 200 kg packaging

Technical Parameters Model: HY-901 | Color: White | Hardness: 30±2 Shore A | Viscosity: 32000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 3.8 MPa | Tear Strength: 22±2 kN/m | Elongation: 380% | Mix Ratio: 100:2~100:3 | Density: 1.12±0.03 g/cm3 Model: HY-902 | Color: White | Hardness: 30±2 Shore A | Viscosity: 35000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 4.0 MPa | Tear Strength: 24±2 kN/m | Elongation: 430% | Mix Ratio: 100:2~100:3 | Density: 1.15±0.03 g/cm3 Model: HY-912 | Color: White | Hardness: 30±2 Shore A | Viscosity: 32000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 4.0 MPa | Tear Strength: 25±2 kN/m | Elongation: 340% | Mix Ratio: 100:2~100:3 | Density: 1.13±0.03 g/cm3 Model: HY-916 | Color: White | Hardness: 14±2 Shore A | Viscosity: 36000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 3.5 MPa | Tear Strength: 25±2 kN/m | Elongation: 570% | Mix Ratio: 100:2~100:3 | Density: 1.10±0.03 g/cm3

Detailed Application Scenarios

Toy Industry Pattern Transfer Toy surfaces are complex with flat and curved areas and multi color patterns. HY-901 pad heads at 30 Shore A conform well to toy surfaces, transferring colorful patterns completely. White color helps check ink uniformity. Works on plastic, wood, and metal toys with stable results.

Electronic Housing Marking Electronic housings need brand logos, model labels, and certification marks with fine text. HY-901 pad heads have smooth surfaces transferring small text and lines. 30 Shore A works on flat and slightly curved housings with even ink and clear edges. Good value for small medium electronics plants.

Application and Operation Instructions Step 1: Clean pad head mold surface. Step 2: Weigh silicone and catalyst at 100:2 to 100:3. Step 3: Stir slowly same direction 2 to 3 minutes. Step 4: Pour slowly into mold, vacuum degas 3 to 5 minutes. Step 5: Room temperature cure 3 to 4 hours then demold. Step 6: Install on pad printer adjust pressure and speed.

Selection Guide HY-901 economic 30A for routine flat slightly curved printing good value toys daily goods. HY-902 medium 30A 4.0MPa 430 percent balanced for electronics appliances. HY-912 high 30A 25 kN/m tear durable for high volume printing. HY-916 ultra soft 14A 570 percent for deep concave irregular curves.

Recommended Application Routine pattern and text transfer on toy and electronic housings.

Quality and Compliance ISO 9001 certified, each batch tested before shipment, COA available, meets RoHS and REACH.

Packaging Specifications 1 kg trial, 5 kg, 20 kg, 25 kg, 200 kg iron drum.

Competitive Advantages Own production line, large factory, sufficient output, competitive price, fast delivery ready stock.

Ordering and Logistics Bank transfer and Alipay, 1 kg samples, standard products ship 1 to 3 days express or freight.

Technical Support and Custom Service Experienced team offers formula customization for hardness viscosity operation time.

Precautions Wear nitrile gloves, avoid eye and skin contact, keep catalyst sealed, accurate weighing.

Storage Cool dry place 5 to 30 degrees, away from sunlight, 12 months shelf life unopened.

Frequently Asked Questions Q: Difference between HY-901 and HY-902? A: Both 30A white, HY-902 has 4.0MPa tensile and 430 percent elongation vs HY-901 3.8MPa and 380 percent, slightly higher price.

Q: How much catalyst? A: 100:2 to 100:3, use 100:3 in cold weather and 100:2 in warm weather.

Q: Bubbles on pad surface? A: Vacuum degas 3 to 5 minutes or let sit 10 minutes after pouring.