Hongye Silicone HY-912 High Tear Pad Printing Silicone 30 Shore A White Durable for High Volume Continuous Line

Core Selling Points • High grade 25 kN/m tear highest among four • 30 Shore A medium hardness flat curved surfaces • White color easy ink observation • 4.0 MPa tensile deformation resistance • Long head life low replacement high volume • Consistent continuous printing fewer defects • 32000 mPa.s smooth pouring • Room temp condensation cure no heating • 30 to 40 min operation 3 to 4 h cure • Reduces downtime overall costs

Technical Parameters Model: HY-912 | Color: White | Hardness: 30±2 Shore A | Viscosity: 32000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 4.0 MPa | Tear Strength: 25±2 kN/m | Elongation: 340% | Mix Ratio: 100:2~100:3 | Density: 1.13±0.03 g/cm3 Model: HY-901 | Color: White | Hardness: 30±2 Shore A | Viscosity: 32000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 3.8 MPa | Tear Strength: 22±2 kN/m | Elongation: 380% | Mix Ratio: 100:2~100:3 | Density: 1.12±0.03 g/cm3 Model: HY-902 | Color: White | Hardness: 30±2 Shore A | Viscosity: 35000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 4.0 MPa | Tear Strength: 24±2 kN/m | Elongation: 430% | Mix Ratio: 100:2~100:3 | Density: 1.15±0.03 g/cm3 Model: HY-916 | Color: White | Hardness: 14±2 Shore A | Viscosity: 36000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 3.5 MPa | Tear Strength: 25±2 kN/m | Elongation: 570% | Mix Ratio: 100:2~100:3 | Density: 1.10±0.03 g/cm3

Detailed Application Scenarios

Electronics Housing High Volume Printing Electronics housings like phone accessories chargers remotes earphone cases need high output fine patterns strong consistency. HY-912 heads with 25kN/m tear resist cracking in long continuous printing. 4.0MPa tensile prevents deformation after repeated impressions keeping depth consistent. For factories making thousands daily, heads last longer reducing downtime. White color helps check ink uniformity.

Auto Parts and Hardware Tool Marking Auto parts like buttons knobs dashboard components and hardware tools like wrenches screwdriver handles have curved surfaces edges and may contact oil solvents demanding durability and solvent resistance. HY-912 high tear prevents cutting on edges, good solvent resistance suits workshop. 30A conforms to curved surfaces complete transfer. Long life lowers consumable costs in mass production.

Application and Operation Instructions Step 1: Clean mold with alcohol remove dust oil. Step 2: Weigh silicone catalyst at 100:2 to 100:3 accurately. Step 3: Stir same direction slowly 2 to 3 minutes. Step 4: Pour slowly into mold vacuum degas 3 to 5 min. Step 5: Room temp cure 3 to 4 hours demold inspect. Step 6: Install adjust pressure speed ink test then batch.

Selection Guide HY-901 economic 30A small medium batch routine good value toys daily goods. HY-902 medium 30A balanced 4.0MPa 430 percent appliances cosmetics. HY-912 high 30A 25kN/m tear longest life high volume continuous lines. HY-916 ultra soft 14A 570 percent deep concave irregular curves.

Recommended Application Pattern text transfer on electronics auto parts hardware tools high volume lines.

Quality and Compliance ISO 9001 certified, each batch tested hardness viscosity tensile tear, COA available, RoHS REACH compliant.

Packaging Specifications 1 kg trial, 5 kg, 20 kg, 25 kg, 200 kg drum, custom for large volume.

Competitive Advantages Own line large factory sufficient output stable premium raw material price advantage over imports fast delivery.

Ordering and Logistics Bank transfer Alipay, 1 kg samples, 1 to 3 days standard, large order negotiable, express freight.

Technical Support and Custom Service Experienced R and D team formula customization hardness viscosity operation time solvent resistance.

Precautions Nitrile gloves, avoid eye skin, keep catalyst sealed, accurate weighing, avoid nitrogen sulfur tin substances.

Storage Cool dry ventilated 5 to 30 degrees, away sunlight heat, 12 months unopened.

Frequently Asked Questions Q: HY-912 vs HY-902? A: Both 30A white 4.0MPa tensile. 912 has 25kN/m tear vs 24kN/m longer life but 340 percent elongation vs 430 percent. 912 for high volume, 902 for general small medium batch. Q: Customers for 912? A: Long hour high output demanding long life consistency like electronics auto parts hardware. Q: Head life? A: Depends on surface ink frequency, 912 lasts over 30 percent longer than economic grade normally.