HY-E625 Addition Curing Platinum Silicone Rubber 25 Shore A for Soap and Resin Craft Molds

Summary: HY-E625 is a 25 Shore A addition curing platinum silicone for soap moulds, resin crafts and plaster castings.

Overview

A mid-soft platinum cure rubber. It holds relief without turning rigid, so soap bars and resin parts leave clean edges.

Specifications

HY-E625, 25 Shore A, parts A and B, mixed 1:1 or 10:1, translucent, -60C to 200C, packed in 1/5/20/25/200kg.

Features

Low shrinkage, balanced tear and tensile strength, smooth flow into fine detail, steady hardness between batches. The addition cure releases no by-products.

How to Use

Weigh both components at the stated ratio, mix for two to three minutes, vacuum degas, then pour from the lowest corner. Cure at room temperature or with gentle heat, then demould.

Applications

Soap and shampoo bar moulds, resin craft parts, plaster castings, candle moulds and prototype moulds with medium relief.

Buyer Benefits

Edges stay clean, detail is reproduced without stiffness, and trials start at 10kg.

Compliance

Compliance documents for this grade list ISO9001, RoHS, REACH, FDA, UL and CE.

Customization

Supplied in any hardness between 10 and 50 Shore A, with colour, ratio and packaging matched to the order.

Quality Control

A sample is cast against the customer's master, batches are retained, and goods are inspected before dispatch.

FAQ

Trial orders start at 10kg. Cure time follows the room temperature and the wall thickness of the part. Samples can be supplied.