HY-E622 Addition Curing Platinum Silicone Rubber 22 Shore A for Soap and Resin Molds

HY-E622 is a 22 Shore A addition curing Platinum silicone rubber for soap and resin moulds, a two component Liquid silicone rubber at 1:1 or 10:1.

Product Overview

The middle of the HY-E range: a grade picked when a mould must copy relief and still hold a straight edge.

Technical Specifications

22 Shore A, addition cure two component, 1:1 or 10:1, translucent, -60C to 200C, packing 1 to 200kg.

Product Features and Advantages

No by-products form during the platinum cure, so the master can be reused. Samples are kept per batch and hardness can be ordered from 10 to 50 Shore A.

How to Use

Weigh both components, mix for two to three minutes, degas, then pour down one corner in a thin stream and leave it to set at room temperature.

Application Scenarios

Soap moulds, resin ornaments, decorative panels, relief plaques and mid-size candle moulds.

Buyer Benefits

A middle grade covers a mixed product line, cuts rework on edges and starts from a 10kg trial.

Certifications and Compliance

ISO 9001, RoHS, REACH, FDA, UL and CE documents are issued per model on request.

Customization Options

Hardness from 10 to 50 Shore A, colour to order, packing to order.

Production Process and Quality Control

A trial cast runs on the customer's master, with a retained sample per lot and inspection before dispatch.

FAQ

Export trial orders start at 10kg. Setting time follows temperature and thickness.