HY-E610 Addition Curing Platinum Silicone Rubber 10 Shore A for Candy and Candle Molds

Summary: HY-E610 is a 10 Shore A addition curing platinum silicone for candy, chocolate and candle moulds.

Overview

The softest grade in the range. It bends around undercuts and lifts off thin relief without tearing, which is what small food and candle moulds need.

Specifications

HY-E610, 10 Shore A, parts A and B, mixed 1:1 or 10:1, translucent, -60C to 200C, packed in 1/5/20/25/200kg.

Features

Low shrinkage, high elongation, tear resistance at thin edges, steady hardness between batches. As an addition cure it releases no by-products, so the master is not attacked.

How to Use

Blend each part separately, weigh at the stated ratio, mix for two to three minutes and degas. Pour from one corner, cure at room temperature or with gentle warmth, then demould when dry.

Applications

Chocolate and candy moulds, gummy and jelly moulds, candle and wax moulds, soap moulds and small craft pieces.

Buyer Benefits

Fine detail comes out complete, thin edges survive demoulding, trials start at 10kg.

Compliance

Compliance paperwork for this grade names ISO9001, RoHS, REACH, FDA, UL and CE.

Customization

Any hardness between 10 and 50 Shore A can be supplied, with colour, mixing ratio and packaging set per order.

Quality Control

A sample is cast against the buyer's master, each batch is retained for traceability, goods are checked before dispatch.

FAQ

MOQ 10kg. Cure time follows room temperature and wall thickness. Trial samples on request.