HY-E615 Addition Curing Platinum Silicone Rubber 15 Shore A for Fine Detail Soap Molds

HY-E615 is a 15 Shore A addition curing Platinum silicone rubber for soap and candle moulds, a two component Liquid silicone rubber at 1:1 or 10:1.

Product Overview

HY-E615 belongs to the soft band of the HY-E mould making range. Soft grades suit shapes that are awkward to fill and to release.

Technical Specifications

15 Shore A, addition cure two component, 1:1 or 10:1, translucent, -60C to 200C, packing from 1 to 200kg.

Product Features and Advantages

The platinum route releases nothing during cure, so the original stays clean and the mould keeps its size after many casts. Batch traceability and hardness from 10 to 50 Shore A.

How to Use

Stir each part, weigh to the stated ratio, mix for two to three minutes, degas, pour a thin stream from one corner, set at room temperature.

Application Scenarios

Soap moulds, candle and wax moulds, plaster relief and small resin figurines.

Buyer Benefits

Easier release and fewer rejects on delicate detail, trial quantities from 10kg.

Certifications and Compliance

ISO 9001, RoHS, REACH, FDA, UL and CE paperwork is issued by model on request.

Customization Options

Hardness selectable from 10 to 50 Shore A, colour and packing by order, 1:1 or 10:1.

Production Process and Quality Control

Pre-production cast on your own master, samples kept per batch, final inspection before dispatch.

FAQ

Trial quantities begin at 10kg. Cure speed depends on temperature and wall thickness.