HY-E620 Addition Curing Platinum Silicone Rubber 20 Shore A for Wax Melt Molds

HY-E620 is a 20 Shore A addition curing Platinum silicone rubber for wax melt and soap moulds, a two component Liquid silicone rubber supplied at 1:1 or 10:1.

Product Overview

Soft enough to let a fine edge come away, firm enough to keep a mould standing while the wax cools.

Technical Specifications

20 Shore A, addition cure two component, 1:1 or 10:1, translucent, -60C to 200C, packing 1 to 200kg.

Product Features and Advantages

No by-products form while the rubber sets, so originals stay clean. Each production lot is sampled, and hardness can be ordered from 10 to 50 Shore A.

How to Use

Weigh both components to the stated ratio, mix two minutes, vacuum out the air, pour from one corner and let the mould set at shop temperature.

Application Scenarios

Wax melts and tarts, pillar candles, soap bars, bath bomb moulds and small relief pieces.

Buyer Benefits

Delicate lettering releases without tearing, one grade serves several product lines, and trials start at 10kg.

Certifications and Compliance

ISO 9001, RoHS, REACH, FDA, UL and CE paperwork can be issued for the models concerned.

Customization Options

Shore A between 10 and 50, colour and packing agreed with each order.

Production Process and Quality Control

A trial casting is made from the buyer's own master, and a sample from every lot is filed before shipping.

FAQ

Trial quantities begin at 10kg. Setting time depends on shop temperature and mould thickness.