HY-E630 Addition Curing Platinum Silicone Rubber 30 Shore A for PU Parts and Decorative Trim Molds

HY-E630 is a 30 Shore A addition curing Platinum silicone rubber for PU parts and decorative trim, a two component Liquid silicone rubber at 1:1 or 10:1.

Product Overview

PU casting and trim work rewards a mould with a firm wall and a clean edge: the cavity has to survive repeated pours without going soft at the corners.

Technical Specifications

30 Shore A, addition cure two component, 1:1 or 10:1, translucent, -60C to 200C, packing 1 to 200kg.

Product Features and Advantages

Platinum cure releases no by-products, so masters stay reusable. Each lot is sampled, hardness is ordered across 10 to 50 Shore A, and the company holds a number of international certifications (ISO / FDA / UL / RoHS and others).

How to Use

Stir each part, weigh to the ratio, mix two minutes, remove entrained air, pour from one corner and let the mould set.

Application Scenarios

PU cast parts, decorative trim and coving, resin boards and mid-size panels.

Buyer Benefits

Corners stay sharp over long runs and release is predictable; trials start at 10kg.

Customization Options

Grades run across the full 10 to 50 Shore A span, and colour and packing are set per order.

Production Process and Quality Control

Production starts only after a trial cast from the customer's master; a sample is kept from each lot and finished goods are checked before they ship.

FAQ

The export trial threshold is 10kg. Cure time is set by workshop temperature and part thickness.