Hongye Silicone HY-901 Economy Pad Printing Silicone 30A Entry Level

Core Selling Points

• Economy entry model, affordable price high cost effectiveness • 30±2A hardness, moderate fluidity convenient pouring • 3.8MPa tensile, 22±2kN/m tear, 380% elongation stable • Good elasticity, complete flat pattern transfer clear edges • Moderate ink pickup stable release, for ordinary patterns • Room temperature cure, simple stable operation • Entry level user friendly, low equipment requirement • Factory direct, regular models same day shipping

Technical Parameters

Model: HY-901 | Color: White | Hardness: 30±2 Shore A | Viscosity: 32000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 3.8 MPa | Tear Strength: 22±2 kN/m | Elongation: 380% | Mix Ratio: 100:2~100:3 | Density: 1.12±0.03 g/cm3 Model: HY-902 | Color: White | Hardness: 30±2 Shore A | Viscosity: 35000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 4.0 MPa | Tear Strength: 24±2 kN/m | Elongation: 430% | Mix Ratio: 100:2~100:3 | Density: 1.15±0.03 g/cm3 Model: HY-912 | Color: White | Hardness: 30±2 Shore A | Viscosity: 32000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 4.0 MPa | Tear Strength: 25±2 kN/m | Elongation: 340% | Mix Ratio: 100:2~100:3 | Density: 1.13±0.03 g/cm3 Model: HY-916 | Color: White | Hardness: 14±2 Shore A | Viscosity: 36000±2000 mPa.s | Operation Time: 30-40 min | Cure Time: 3-4 h | Tensile Strength: 3.5 MPa | Tear Strength: 25±2 kN/m | Elongation: 570% | Mix Ratio: 100:2~100:3 | Density: 1.10±0.03 g/cm3

Application Scenarios

Plastic toys and stationery, ordinary flat patterns, brand logos, cartoon designs, medium volume. Daily necessities and small electronic accessories, simple logos, model identifications, certification marks, large volume.

Operation Instructions

1. Clean mold, apply release agent
2. Weigh 100:2 to 100:3 ratio with electronic scale
3. Stir 3 to 5 minutes, avoid bubbles
4. Vacuum degas 2 to 3 minutes, or natural degas 5 to 10 minutes
5. Pour slowly along mold wall
6. Cure 3 to 4 hours, demold, use after 24 hours

Selection Guide

HY-901 economy for flat patterns, HY-902 balanced for conventional, HY-912 high tear for large area, HY-916 ultra soft for curved.

Recommended Application

Ordinary flat pattern simple logo small medium volume printing for toys stationery daily necessities.

Quality and Compliance

ISO 9001 certified, COA reports, RoHS and REACH compliant.

Packaging

1kg, 5kg, 20kg, 25kg, 200kg, custom available.

Competitive Advantages

Own production line, monthly 100 tons, factory direct, stock supply.

Ordering and Logistics

T/T and PayPal, sample service, 1 to 3 days delivery, express air sea freight.

Technical Support

Experienced team, custom formulation for hardness viscosity color.

Precautions

Wear nitrile gloves, avoid nitrogen sulfur tin phosphorus, weigh accurately.

Storage

Cool dry place, 5 to 35 degrees, 12 months shelf life.

FAQ

Q: Difference from HY-902? A: HY-901 economy lower price, for simple small patterns limited budget. HY-902 better performance longer life for conventional production. Q: Pad service life? A: 30000 to 50000 times for small flat patterns, 20000 to 30000 for medium patterns. Q: Can use without vacuum degassing? A: Yes, natural degas 5 to 10 minutes works for ordinary patterns.